npub1uz…fm359

Last Notes

2023-06-07 03:04:50 UTC

- reply

📅 Original date posted:2012-02-27
📝 Original message:AWESOME!! Thank you!!
Anyway, I found a new problem... lol
/usr/local/bin/bitcoind getinfo #okay
{
"version" : 40001,
"blocks" : 168753,
"connections" : 8,
"difficulty" : 1376302.26788638,
"testnet" : false
}
/usr/local/bin/bitcoind getaccountaddress "" # okay...
1J4vNcvEdeCuLH4yvyoC2gxFEF4zquoJ87
/usr/local/bin/bitcoind listaccounts # NOT okay...
{
}
/usr/local/bin/bitcoind getaccountaddress "teste" # okay
1E6pGh6AAtuJdFXheZMp1zdYmvdqAQn9QT
/usr/local/bin/bitcoind listaccounts # NOT okay...
{
"teste" : 0.00000000
}
Where is my default account listed at "listaccounts" output?!
Best,
Thiago
2012/2/26 Michael Grønager <gronager at ceptacle.com>
> And if you do an update now "help" is there too ;)
>
> /M
>
> On 25/02/2012, at 03:11, Martinx - ジェームズ wrote:
>
> > Thank you!!!
> >
> > It is all working now! Except "help"...
> >
> > Nice work Michael!!
> >
> > Best,
> > Thiago
> >
> > 2012/2/24 Michael Grønager <gronager at ceptacle.com>
> > OK - didn't took the weekend:
> >
> > support for "port" is on github now :)
> >
> > Only took two lines:
> >
> > ("port", value<unsigned short>(&port)->default_value(8333),
> "Listen on specified port for the p2p protocol")
> >
> > and using the port option in the Node constructor (was there already):
> >
> > Node node(chain, data_dir, args.count("nolisten") ? "" :
> "0.0.0.0", lexical_cast<string>(port)); // it is also here we specify the
> use of a proxy!
> >
> > /M
> >
> >
> >
> > On 24/02/2012, at 19:49, Martinx - ジェームズ wrote:
> >
> >> Hi Michael,
> >>
> >> Thank you for your attention!
> >>
> >> Now, I'm trying to start libcoin's bitcoind using high ports but, it
> always try to listen at 8332, no matter what I "say"...
> >>
> >> Look:
> >>
> >> $ cat .bitcoin/bitcoin.conf
> >> server=1
> >> daemon=1
> >> rpcuser=libcoin
> >> rpcpassword=LibCoin13
> >> rpcport=10332
> >> port=10333
> >>
> >> But:
> >>
> >> /usr/local/bin/bitcoind
> >> Error: Address already in use
> >>
> >> terminate called after throwing an instance of 'DbException'
> >> what(): DbEnv::close: Invalid argument
> >> Aborted
> >>
> >> When I "strace it", I can see:
> >>
> >> ...
> >> bind(12, {sa_family=AF_INET, sin_port=htons(8333),
> sin_addr=inet_addr("0.0.0.0")}, 16) = -1 EADDRINUSE (Address already in use)
> >> ...
> >>
> >> I already tried:
> >>
> >> /usr/local/bin/bitcoind --rpcport 10332
> >> /usr/local/bin/bitcoind --rpcport=10332
> >>
> >> Without success...
> >>
> >> Thanks again!
> >> Thiago
> >>
> >> 2012/2/24 Michael Grønager <gronager at ceptacle.com>
> >> Hi Thiago,
> >>
> >> Forgot to comment on the two latter:
> >>
> >>> $ bitcoind getaccountaddress ""
> >>> HTTP error code: 401
> >>> Error: couldn't parse reply from server
> >>>
> >>> $ bitcoind listaccounts
> >>> HTTP error code: 401
> >>> Error: couldn't parse reply from server
> >>>
> >>
> >> 401 = permission denied - you need to setup username / password either
> on the commandline or in the bicoin.conf file to access those commands...
> >>
> >> See in the bitcoind.cpp file for commands that you can use with and
> without auth...
> >>
> >> Those that contains an "auth" requires auth:
> >>
> >> server.registerMethod(method_ptr(new GetBalance(wallet)), auth);
> >>
> >> As opposed to:
> >>
> >> server.registerMethod(method_ptr(new GetInfo(node)));
> >>
> >> auth is defined by:
> >>
> >> Auth auth(rpc_user, rpc_pass); // if rpc_user and rpc_pass are not
> set, all authenticated methods becomes disallowed.
> >>
> >> so you just experience the case explained in the comment ;) I admit
> that the output could be more readable, though!
> >>
> >> /M
> >>
> >>
> >>>
> >>> Any tips?! lol
> >>>
> >>> Thanks!
> >>> Thiago
> >>>
> >>> 2012/2/23 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
> >>> AWESOME!!!
> >>>
> >>> I can compile libcoin at my Ubuntu 11.10... I just need to install:
> >>>
> >>> sudo aptitude install libboost1.46-all-dev
> >>>
> >>> ...alongside with another already installed dependencies, and now it
> works!!
> >>>
> >>> Thank you!
> >>> Thiago
> >>>
> >>> 2012/2/23 Michael Grønager <gronager at ceptacle.com>
> >>> Hi Martinx,
> >>>
> >>> Another note:
> >>>
> >>> boost 1.42 and openssl 1.0 has a conflict (you will see it when you
> try to compile coinHTTP with that specific combination: sslv2 has been
> removed from openssl, but boost still references it.)
> >>>
> >>> You should do a :
> >>>
> >>> sudo apt-get upgrade libboost-dev-all
> >>>
> >>> to get the 1.46.1 library
> >>>
> >>> /M
> >>>
> >>>
> >>> On 23/02/2012, at 18:31, Martinx - ジェームズ wrote:
> >>>
> >>>> Hi Michael!
> >>>>
> >>>> Thank you for libcoin! It is a awesome evolution for Bitcoin and for
> the CryptoCurrencies as a hole... Thanks!!!
> >>>>
> >>>> Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this
> machine, I have compiled and running Bitcoin (from sources), Namecoin,
> Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to
> compile libcoin, I got:
> >>>>
> >>>> ----
> >>>> user at desk:~/libcoin$ ./configure
> >>>> -- The C compiler identification is GNU
> >>>> -- The CXX compiler identification is GNU
> >>>> -- Check for working C compiler: /usr/bin/gcc
> >>>> -- Check for working C compiler: /usr/bin/gcc -- works
> >>>> -- Detecting C compiler ABI info
> >>>> -- Detecting C compiler ABI info - done
> >>>> -- Check for working CXX compiler: /usr/bin/c++
> >>>> -- Check for working CXX compiler: /usr/bin/c++ -- works
> >>>> -- Detecting CXX compiler ABI info
> >>>> -- Detecting CXX compiler ABI info - done
> >>>> -- Looking for include files CMAKE_HAVE_PTHREAD_H
> >>>> -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
> >>>> -- Looking for pthread_create in pthreads
> >>>> -- Looking for pthread_create in pthreads - not found
> >>>> -- Looking for pthread_create in pthread
> >>>> -- Looking for pthread_create in pthread - found
> >>>> -- Found Threads: TRUE
> >>>> -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
> >>>> -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
> >>>> -- Looking for gethostbyname
> >>>> -- Looking for gethostbyname - found
> >>>> -- Looking for connect
> >>>> -- Looking for connect - found
> >>>> -- Looking for remove
> >>>> -- Looking for remove - found
> >>>> -- Looking for shmat
> >>>> -- Looking for shmat - found
> >>>> -- Looking for IceConnectionNumber in ICE
> >>>> -- Looking for IceConnectionNumber in ICE - found
> >>>> -- Found X11: /usr/lib/i386-linux-gnu/libX11.so
> >>>> -- Boost version: 1.42.0
> >>>> -- Found the following Boost libraries:
> >>>> -- date_time
> >>>> -- regex
> >>>> -- filesystem
> >>>> -- system
> >>>> -- program_options
> >>>> -- thread
> >>>> -- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so
> >>>> -- Looking for Q_WS_X11
> >>>> -- Looking for Q_WS_X11 - found
> >>>> -- Looking for Q_WS_WIN
> >>>> -- Looking for Q_WS_WIN - not found.
> >>>> -- Looking for Q_WS_QWS
> >>>> -- Looking for Q_WS_QWS - not found.
> >>>> -- Looking for Q_WS_MAC
> >>>> -- Looking for Q_WS_MAC - not found.
> >>>> -- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
> >>>> -- Found wxWidgets: TRUE
> >>>>
> >>>> The build system is configured to install libraries to /usr/local/lib
> >>>> Your applications may not be able to find your installed libraries
> unless you:
> >>>> set your LD_LIBRARY_PATH (user specific) or
> >>>> update your ld.so configuration (system wide)
> >>>> You have an ld.so.conf.d directory on your system, so if you wish to
> ensure that
> >>>> applications find the installed libcoin libraries, system wide, you
> could install an
> >>>> libcoin specific ld.so configuration with:
> >>>> sudo make install_ld_conf
> >>>>
> >>>> -- Configuring done
> >>>> -- Generating done
> >>>> -- Build files have been written to: /home/user/libcoin
> >>>> ----
> >>>>
> >>>> Now I tried make, without success:
> >>>>
> >>>> ----
> >>>> .....
> >>>> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xf):
> undefined reference to `BN_init'
> >>>> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x1e):
> undefined reference to `BN_copy'
> >>>> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x38):
> undefined reference to `BN_set_negative'
> >>>> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x4f):
> undefined reference to `BN_clear_free'
> >>>> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xd3):
> undefined reference to `BN_clear_free'
> >>>> ../../lib/libcoin.a(Script.o): In function `operator<<(CBigNum
> const&, unsigned int)':
> >>>> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x16): undefined reference to `BN_init'
> >>>> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x2c): undefined reference to `BN_lshift'
> >>>> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0xad): undefined reference to `BN_clear_free'
> >>>> ../../lib/libcoin.a(Script.o): In function `operator>>(CBigNum
> const&, unsigned int)':
> >>>> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xf): undefined reference to `BN_init'
> >>>> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x1e): undefined reference to `BN_copy'
> >>>> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x47): undefined reference to `BN_clear_free'
> >>>> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xcb): undefined reference to `BN_clear_free'
> >>>> ../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum
> const&, CBigNum const&)':
> >>>> Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const&,
> CBigNum const&)]+0x14): undefined reference to `BN_cmp'
> >>>> ../../lib/libcoin.a(Script.o): In function `operator>(CBigNum const&,
> CBigNum const&)':
> >>>> Script.cpp:(.text._ZgtRK7CBigNumS1_[operator>(CBigNum const&, CBigNum
> const&)]+0x14): undefined reference to `BN_cmp'
> >>>> ../../lib/libcoin.a(Script.o): In function `uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> > >)':
> >>>>
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0x6d): undefined reference to `SHA256'
> >>>>
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0xb8): undefined reference to `SHA256'
> >>>> collect2: ld returned 1 exit status
> >>>> make[2]: *** [bin/bitcoind] Error 1
> >>>> make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all]
> Error 2
> >>>> make: *** [all] Error 2
> >>>> -----
> >>>>
> >>>> What can I do?!
> >>>>
> >>>> Best,
> >>>> Thiago
> >>>>
> >>>>
> >>>> On 1 February 2012 12:18, Michael Grønager <gronager at ceptacle.com>
> wrote:
> >>>> Dear Bitcoiners,
> >>>>
> >>>> libcoin is now in a state ready for its first release, which I would
> like to share with you!
> >>>>
> >>>> === libcoin is a crypto currency library based on the bitcoin/bitcoin
> "Satoshi" client. ===
> >>>>
> >>>> Copenhagen, Denmark - 1st February 2012 Ceptacle announces the
> release of the first version of the crypto currency library "libcoin" based
> on the bitcoin/bitcoin "Satoshi" client.
> >>>>
> >>>> libcoin also maintains a version of bitcoind that is a 100%
> compatible drop-in replacement of the bitcoin/bitcoind client: You can use
> it on the same computer on the same files and you can call it with the same
> scripts. And you can easily extend it without touching the basic bitcoin
> source files.
> >>>>
> >>>> The libcoin/bitcoind client downloads the entire block chain 3.5
> times faster than the bitcoin/bitcoind client. This is less than 90 minutes
> on a modern laptop!
> >>>>
> >>>> In libcoin, the Satoshi client code has been completely refactored,
> properly encapsulating classes, removing all globals, moving from threads
> and mutexes to a pure asynchronous approach. Functionalities have been
> divided into logical units and libraries, minimizing dependencies for e.g.
> thin clients.
> >>>>
> >>>> libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin,
> litecoin, ...) specific settings are maintained from a single class (Chain)
> and hence experiments with chain settings, mining, security and digital
> currencies for research and educational purposes are easily accessible. See
> the ponzicoin example for how you define your own chain.
> >>>>
> >>>> The build system of libcoin is based on CMake and supports builds of
> static and dynamic libraries on Linux, Mac OS X, and Windows.
> >>>>
> >>>> The libcoin license is LGPL v. 3. This mean that you can use it in
> open source as well as in commercial projects, but improvements should go
> back into the libcoin library.
> >>>>
> >>>> ======
> >>>>
> >>>> Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki
> >>>>
> >>>> Join libcoin on twitter: http://twitter.com/libcoin
> >>>>
> >>>> Download "libcoin Satoshi release":
> http://github.com/ceptacle/libcoin/zipball/v0.4.0.1
> >>>>
> >>>> Best regards,
> >>>>
> >>>> Michael Gronager, PhD
> >>>> Director, Ceptacle
> >>>> Jens Juels Gade 33
> >>>> 2100 Copenhagen E
> >>>> Mobile: +45 31 45 14 01
> >>>> E-mail: gronager at ceptacle.com
> >>>> Web: http://www.ceptacle.com/
> >>>>
> >>>>
> >>>>
> ------------------------------------------------------------------------------
> >>>> Keep Your Developer Skills Current with LearnDevNow!
> >>>> The most comprehensive online learning library for Microsoft
> developers
> >>>> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3,
> MVC3,
> >>>> Metro Style Apps, more. Free future releases when you subscribe now!
> >>>> http://p.sf.net/sfu/learndevnow-d2d
> >>>> _______________________________________________
> >>>> Bitcoin-development mailing list
> >>>> Bitcoin-development at lists.sourceforge.net
> >>>> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
> >>>>
> >>>
> >>> Michael Gronager, PhD
> >>> Director, Ceptacle
> >>> Jens Juels Gade 33
> >>> 2100 Copenhagen E
> >>> Mobile: +45 31 45 14 01
> >>> E-mail: gronager at ceptacle.com
> >>> Web: http://www.ceptacle.com/
> >>>
> >>>
> >>>
> >>
> >>
> >
> > Michael Gronager, PhD
> > Director, Ceptacle
> > Jens Juels Gade 33
> > 2100 Copenhagen E
> > Mobile: +45 31 45 14 01
> > E-mail: gronager at ceptacle.com
> > Web: http://www.ceptacle.com/
> >
> >
>
> Michael Gronager, PhD
> Director, Ceptacle
> Jens Juels Gade 33
> 2100 Copenhagen E
> Mobile: +45 31 45 14 01
> E-mail: gronager at ceptacle.com
> Web: http://www.ceptacle.com/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20120227/f256a79d/attachment.html>

2023-06-07 03:04:43 UTC

- reply

📅 Original date posted:2012-02-25
📝 Original message:Thank you!!!
It is all working now! Except "help"...
Nice work Michael!!
Best,
Thiago
2012/2/24 Michael Grønager <gronager at ceptacle.com>
> OK - didn't took the weekend:
>
> support for "port" is on github now :)
>
> Only took two lines:
>
> ("port", value<unsigned short>(&port)->default_value(8333),
> "Listen on specified port for the p2p protocol")
>
> and using the port option in the Node constructor (was there already):
>
> Node node(chain, data_dir, args.count("nolisten") ? "" : "0.0.0.0",
> lexical_cast<string>(port)); // it is also here we specify the use of a
> proxy!
>
> /M
>
>
>
> On 24/02/2012, at 19:49, Martinx - ジェームズ wrote:
>
> > Hi Michael,
> >
> > Thank you for your attention!
> >
> > Now, I'm trying to start libcoin's bitcoind using high ports but, it
> always try to listen at 8332, no matter what I "say"...
> >
> > Look:
> >
> > $ cat .bitcoin/bitcoin.conf
> > server=1
> > daemon=1
> > rpcuser=libcoin
> > rpcpassword=LibCoin13
> > rpcport=10332
> > port=10333
> >
> > But:
> >
> > /usr/local/bin/bitcoind
> > Error: Address already in use
> >
> > terminate called after throwing an instance of 'DbException'
> > what(): DbEnv::close: Invalid argument
> > Aborted
> >
> > When I "strace it", I can see:
> >
> > ...
> > bind(12, {sa_family=AF_INET, sin_port=htons(8333),
> sin_addr=inet_addr("0.0.0.0")}, 16) = -1 EADDRINUSE (Address already in use)
> > ...
> >
> > I already tried:
> >
> > /usr/local/bin/bitcoind --rpcport 10332
> > /usr/local/bin/bitcoind --rpcport=10332
> >
> > Without success...
> >
> > Thanks again!
> > Thiago
> >
> > 2012/2/24 Michael Grønager <gronager at ceptacle.com>
> > Hi Thiago,
> >
> > Forgot to comment on the two latter:
> >
> > > $ bitcoind getaccountaddress ""
> > > HTTP error code: 401
> > > Error: couldn't parse reply from server
> > >
> > > $ bitcoind listaccounts
> > > HTTP error code: 401
> > > Error: couldn't parse reply from server
> > >
> >
> > 401 = permission denied - you need to setup username / password either
> on the commandline or in the bicoin.conf file to access those commands...
> >
> > See in the bitcoind.cpp file for commands that you can use with and
> without auth...
> >
> > Those that contains an "auth" requires auth:
> >
> > server.registerMethod(method_ptr(new GetBalance(wallet)), auth);
> >
> > As opposed to:
> >
> > server.registerMethod(method_ptr(new GetInfo(node)));
> >
> > auth is defined by:
> >
> > Auth auth(rpc_user, rpc_pass); // if rpc_user and rpc_pass are not
> set, all authenticated methods becomes disallowed.
> >
> > so you just experience the case explained in the comment ;) I admit that
> the output could be more readable, though!
> >
> > /M
> >
> >
> > >
> > > Any tips?! lol
> > >
> > > Thanks!
> > > Thiago
> > >
> > > 2012/2/23 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
> > > AWESOME!!!
> > >
> > > I can compile libcoin at my Ubuntu 11.10... I just need to install:
> > >
> > > sudo aptitude install libboost1.46-all-dev
> > >
> > > ...alongside with another already installed dependencies, and now it
> works!!
> > >
> > > Thank you!
> > > Thiago
> > >
> > > 2012/2/23 Michael Grønager <gronager at ceptacle.com>
> > > Hi Martinx,
> > >
> > > Another note:
> > >
> > > boost 1.42 and openssl 1.0 has a conflict (you will see it when you
> try to compile coinHTTP with that specific combination: sslv2 has been
> removed from openssl, but boost still references it.)
> > >
> > > You should do a :
> > >
> > > sudo apt-get upgrade libboost-dev-all
> > >
> > > to get the 1.46.1 library
> > >
> > > /M
> > >
> > >
> > > On 23/02/2012, at 18:31, Martinx - ジェームズ wrote:
> > >
> > >> Hi Michael!
> > >>
> > >> Thank you for libcoin! It is a awesome evolution for Bitcoin and for
> the CryptoCurrencies as a hole... Thanks!!!
> > >>
> > >> Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this
> machine, I have compiled and running Bitcoin (from sources), Namecoin,
> Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to
> compile libcoin, I got:
> > >>
> > >> ----
> > >> user at desk:~/libcoin$ ./configure
> > >> -- The C compiler identification is GNU
> > >> -- The CXX compiler identification is GNU
> > >> -- Check for working C compiler: /usr/bin/gcc
> > >> -- Check for working C compiler: /usr/bin/gcc -- works
> > >> -- Detecting C compiler ABI info
> > >> -- Detecting C compiler ABI info - done
> > >> -- Check for working CXX compiler: /usr/bin/c++
> > >> -- Check for working CXX compiler: /usr/bin/c++ -- works
> > >> -- Detecting CXX compiler ABI info
> > >> -- Detecting CXX compiler ABI info - done
> > >> -- Looking for include files CMAKE_HAVE_PTHREAD_H
> > >> -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
> > >> -- Looking for pthread_create in pthreads
> > >> -- Looking for pthread_create in pthreads - not found
> > >> -- Looking for pthread_create in pthread
> > >> -- Looking for pthread_create in pthread - found
> > >> -- Found Threads: TRUE
> > >> -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
> > >> -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
> > >> -- Looking for gethostbyname
> > >> -- Looking for gethostbyname - found
> > >> -- Looking for connect
> > >> -- Looking for connect - found
> > >> -- Looking for remove
> > >> -- Looking for remove - found
> > >> -- Looking for shmat
> > >> -- Looking for shmat - found
> > >> -- Looking for IceConnectionNumber in ICE
> > >> -- Looking for IceConnectionNumber in ICE - found
> > >> -- Found X11: /usr/lib/i386-linux-gnu/libX11.so
> > >> -- Boost version: 1.42.0
> > >> -- Found the following Boost libraries:
> > >> -- date_time
> > >> -- regex
> > >> -- filesystem
> > >> -- system
> > >> -- program_options
> > >> -- thread
> > >> -- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so
> > >> -- Looking for Q_WS_X11
> > >> -- Looking for Q_WS_X11 - found
> > >> -- Looking for Q_WS_WIN
> > >> -- Looking for Q_WS_WIN - not found.
> > >> -- Looking for Q_WS_QWS
> > >> -- Looking for Q_WS_QWS - not found.
> > >> -- Looking for Q_WS_MAC
> > >> -- Looking for Q_WS_MAC - not found.
> > >> -- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
> > >> -- Found wxWidgets: TRUE
> > >>
> > >> The build system is configured to install libraries to /usr/local/lib
> > >> Your applications may not be able to find your installed libraries
> unless you:
> > >> set your LD_LIBRARY_PATH (user specific) or
> > >> update your ld.so configuration (system wide)
> > >> You have an ld.so.conf.d directory on your system, so if you wish to
> ensure that
> > >> applications find the installed libcoin libraries, system wide, you
> could install an
> > >> libcoin specific ld.so configuration with:
> > >> sudo make install_ld_conf
> > >>
> > >> -- Configuring done
> > >> -- Generating done
> > >> -- Build files have been written to: /home/user/libcoin
> > >> ----
> > >>
> > >> Now I tried make, without success:
> > >>
> > >> ----
> > >> .....
> > >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xf):
> undefined reference to `BN_init'
> > >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x1e):
> undefined reference to `BN_copy'
> > >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x38):
> undefined reference to `BN_set_negative'
> > >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x4f):
> undefined reference to `BN_clear_free'
> > >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xd3):
> undefined reference to `BN_clear_free'
> > >> ../../lib/libcoin.a(Script.o): In function `operator<<(CBigNum
> const&, unsigned int)':
> > >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x16): undefined reference to `BN_init'
> > >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x2c): undefined reference to `BN_lshift'
> > >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0xad): undefined reference to `BN_clear_free'
> > >> ../../lib/libcoin.a(Script.o): In function `operator>>(CBigNum
> const&, unsigned int)':
> > >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xf): undefined reference to `BN_init'
> > >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x1e): undefined reference to `BN_copy'
> > >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x47): undefined reference to `BN_clear_free'
> > >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xcb): undefined reference to `BN_clear_free'
> > >> ../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum
> const&, CBigNum const&)':
> > >> Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const&,
> CBigNum const&)]+0x14): undefined reference to `BN_cmp'
> > >> ../../lib/libcoin.a(Script.o): In function `operator>(CBigNum const&,
> CBigNum const&)':
> > >> Script.cpp:(.text._ZgtRK7CBigNumS1_[operator>(CBigNum const&, CBigNum
> const&)]+0x14): undefined reference to `BN_cmp'
> > >> ../../lib/libcoin.a(Script.o): In function `uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> > >)':
> > >>
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0x6d): undefined reference to `SHA256'
> > >>
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0xb8): undefined reference to `SHA256'
> > >> collect2: ld returned 1 exit status
> > >> make[2]: *** [bin/bitcoind] Error 1
> > >> make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all]
> Error 2
> > >> make: *** [all] Error 2
> > >> -----
> > >>
> > >> What can I do?!
> > >>
> > >> Best,
> > >> Thiago
> > >>
> > >>
> > >> On 1 February 2012 12:18, Michael Grønager <gronager at ceptacle.com>
> wrote:
> > >> Dear Bitcoiners,
> > >>
> > >> libcoin is now in a state ready for its first release, which I would
> like to share with you!
> > >>
> > >> === libcoin is a crypto currency library based on the bitcoin/bitcoin
> "Satoshi" client. ===
> > >>
> > >> Copenhagen, Denmark - 1st February 2012 Ceptacle announces the
> release of the first version of the crypto currency library "libcoin" based
> on the bitcoin/bitcoin "Satoshi" client.
> > >>
> > >> libcoin also maintains a version of bitcoind that is a 100%
> compatible drop-in replacement of the bitcoin/bitcoind client: You can use
> it on the same computer on the same files and you can call it with the same
> scripts. And you can easily extend it without touching the basic bitcoin
> source files.
> > >>
> > >> The libcoin/bitcoind client downloads the entire block chain 3.5
> times faster than the bitcoin/bitcoind client. This is less than 90 minutes
> on a modern laptop!
> > >>
> > >> In libcoin, the Satoshi client code has been completely refactored,
> properly encapsulating classes, removing all globals, moving from threads
> and mutexes to a pure asynchronous approach. Functionalities have been
> divided into logical units and libraries, minimizing dependencies for e.g.
> thin clients.
> > >>
> > >> libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin,
> litecoin, ...) specific settings are maintained from a single class (Chain)
> and hence experiments with chain settings, mining, security and digital
> currencies for research and educational purposes are easily accessible. See
> the ponzicoin example for how you define your own chain.
> > >>
> > >> The build system of libcoin is based on CMake and supports builds of
> static and dynamic libraries on Linux, Mac OS X, and Windows.
> > >>
> > >> The libcoin license is LGPL v. 3. This mean that you can use it in
> open source as well as in commercial projects, but improvements should go
> back into the libcoin library.
> > >>
> > >> ======
> > >>
> > >> Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki
> > >>
> > >> Join libcoin on twitter: http://twitter.com/libcoin
> > >>
> > >> Download "libcoin Satoshi release":
> http://github.com/ceptacle/libcoin/zipball/v0.4.0.1
> > >>
> > >> Best regards,
> > >>
> > >> Michael Gronager, PhD
> > >> Director, Ceptacle
> > >> Jens Juels Gade 33
> > >> 2100 Copenhagen E
> > >> Mobile: +45 31 45 14 01
> > >> E-mail: gronager at ceptacle.com
> > >> Web: http://www.ceptacle.com/
> > >>
> > >>
> > >>
> ------------------------------------------------------------------------------
> > >> Keep Your Developer Skills Current with LearnDevNow!
> > >> The most comprehensive online learning library for Microsoft
> developers
> > >> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3,
> MVC3,
> > >> Metro Style Apps, more. Free future releases when you subscribe now!
> > >> http://p.sf.net/sfu/learndevnow-d2d
> > >> _______________________________________________
> > >> Bitcoin-development mailing list
> > >> Bitcoin-development at lists.sourceforge.net
> > >> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
> > >>
> > >
> > > Michael Gronager, PhD
> > > Director, Ceptacle
> > > Jens Juels Gade 33
> > > 2100 Copenhagen E
> > > Mobile: +45 31 45 14 01
> > > E-mail: gronager at ceptacle.com
> > > Web: http://www.ceptacle.com/
> > >
> > >
> > >
> >
> >
>
> Michael Gronager, PhD
> Director, Ceptacle
> Jens Juels Gade 33
> 2100 Copenhagen E
> Mobile: +45 31 45 14 01
> E-mail: gronager at ceptacle.com
> Web: http://www.ceptacle.com/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20120225/f28e38b5/attachment.html>

2023-06-07 03:04:31 UTC

- reply

📅 Original date posted:2012-02-24
📝 Original message:Hi Michael,
Thank you for your attention!
Now, I'm trying to start libcoin's bitcoind using high ports but, it
always try to listen at 8332, no matter what I "say"...
Look:
$ cat .bitcoin/bitcoin.conf
server=1
daemon=1
rpcuser=libcoin
rpcpassword=LibCoin13
rpcport=10332
port=10333
But:
/usr/local/bin/bitcoind
Error: Address already in use
terminate called after throwing an instance of 'DbException'
what(): DbEnv::close: Invalid argument
Aborted
When I "strace it", I can see:
...
bind(12, {sa_family=AF_INET, sin_port=htons(8333),
sin_addr=inet_addr("0.0.0.0")}, 16) = -1 EADDRINUSE (Address already in use)
...
I already tried:
/usr/local/bin/bitcoind --rpcport 10332
/usr/local/bin/bitcoind --rpcport=10332
Without success...
Thanks again!
Thiago
2012/2/24 Michael Grønager <gronager at ceptacle.com>
> Hi Thiago,
>
> Forgot to comment on the two latter:
>
> > $ bitcoind getaccountaddress ""
> > HTTP error code: 401
> > Error: couldn't parse reply from server
> >
> > $ bitcoind listaccounts
> > HTTP error code: 401
> > Error: couldn't parse reply from server
> >
>
> 401 = permission denied - you need to setup username / password either on
> the commandline or in the bicoin.conf file to access those commands...
>
> See in the bitcoind.cpp file for commands that you can use with and
> without auth...
>
> Those that contains an "auth" requires auth:
>
> server.registerMethod(method_ptr(new GetBalance(wallet)), auth);
>
> As opposed to:
>
> server.registerMethod(method_ptr(new GetInfo(node)));
>
> auth is defined by:
>
> Auth auth(rpc_user, rpc_pass); // if rpc_user and rpc_pass are not
> set, all authenticated methods becomes disallowed.
>
> so you just experience the case explained in the comment ;) I admit that
> the output could be more readable, though!
>
> /M
>
>
> >
> > Any tips?! lol
> >
> > Thanks!
> > Thiago
> >
> > 2012/2/23 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
> > AWESOME!!!
> >
> > I can compile libcoin at my Ubuntu 11.10... I just need to install:
> >
> > sudo aptitude install libboost1.46-all-dev
> >
> > ...alongside with another already installed dependencies, and now it
> works!!
> >
> > Thank you!
> > Thiago
> >
> > 2012/2/23 Michael Grønager <gronager at ceptacle.com>
> > Hi Martinx,
> >
> > Another note:
> >
> > boost 1.42 and openssl 1.0 has a conflict (you will see it when you try
> to compile coinHTTP with that specific combination: sslv2 has been removed
> from openssl, but boost still references it.)
> >
> > You should do a :
> >
> > sudo apt-get upgrade libboost-dev-all
> >
> > to get the 1.46.1 library
> >
> > /M
> >
> >
> > On 23/02/2012, at 18:31, Martinx - ジェームズ wrote:
> >
> >> Hi Michael!
> >>
> >> Thank you for libcoin! It is a awesome evolution for Bitcoin and for
> the CryptoCurrencies as a hole... Thanks!!!
> >>
> >> Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this
> machine, I have compiled and running Bitcoin (from sources), Namecoin,
> Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to
> compile libcoin, I got:
> >>
> >> ----
> >> user at desk:~/libcoin$ ./configure
> >> -- The C compiler identification is GNU
> >> -- The CXX compiler identification is GNU
> >> -- Check for working C compiler: /usr/bin/gcc
> >> -- Check for working C compiler: /usr/bin/gcc -- works
> >> -- Detecting C compiler ABI info
> >> -- Detecting C compiler ABI info - done
> >> -- Check for working CXX compiler: /usr/bin/c++
> >> -- Check for working CXX compiler: /usr/bin/c++ -- works
> >> -- Detecting CXX compiler ABI info
> >> -- Detecting CXX compiler ABI info - done
> >> -- Looking for include files CMAKE_HAVE_PTHREAD_H
> >> -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
> >> -- Looking for pthread_create in pthreads
> >> -- Looking for pthread_create in pthreads - not found
> >> -- Looking for pthread_create in pthread
> >> -- Looking for pthread_create in pthread - found
> >> -- Found Threads: TRUE
> >> -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
> >> -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
> >> -- Looking for gethostbyname
> >> -- Looking for gethostbyname - found
> >> -- Looking for connect
> >> -- Looking for connect - found
> >> -- Looking for remove
> >> -- Looking for remove - found
> >> -- Looking for shmat
> >> -- Looking for shmat - found
> >> -- Looking for IceConnectionNumber in ICE
> >> -- Looking for IceConnectionNumber in ICE - found
> >> -- Found X11: /usr/lib/i386-linux-gnu/libX11.so
> >> -- Boost version: 1.42.0
> >> -- Found the following Boost libraries:
> >> -- date_time
> >> -- regex
> >> -- filesystem
> >> -- system
> >> -- program_options
> >> -- thread
> >> -- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so
> >> -- Looking for Q_WS_X11
> >> -- Looking for Q_WS_X11 - found
> >> -- Looking for Q_WS_WIN
> >> -- Looking for Q_WS_WIN - not found.
> >> -- Looking for Q_WS_QWS
> >> -- Looking for Q_WS_QWS - not found.
> >> -- Looking for Q_WS_MAC
> >> -- Looking for Q_WS_MAC - not found.
> >> -- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
> >> -- Found wxWidgets: TRUE
> >>
> >> The build system is configured to install libraries to /usr/local/lib
> >> Your applications may not be able to find your installed libraries
> unless you:
> >> set your LD_LIBRARY_PATH (user specific) or
> >> update your ld.so configuration (system wide)
> >> You have an ld.so.conf.d directory on your system, so if you wish to
> ensure that
> >> applications find the installed libcoin libraries, system wide, you
> could install an
> >> libcoin specific ld.so configuration with:
> >> sudo make install_ld_conf
> >>
> >> -- Configuring done
> >> -- Generating done
> >> -- Build files have been written to: /home/user/libcoin
> >> ----
> >>
> >> Now I tried make, without success:
> >>
> >> ----
> >> .....
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xf):
> undefined reference to `BN_init'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x1e):
> undefined reference to `BN_copy'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x38):
> undefined reference to `BN_set_negative'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x4f):
> undefined reference to `BN_clear_free'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xd3):
> undefined reference to `BN_clear_free'
> >> ../../lib/libcoin.a(Script.o): In function `operator<<(CBigNum const&,
> unsigned int)':
> >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x16): undefined reference to `BN_init'
> >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x2c): undefined reference to `BN_lshift'
> >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0xad): undefined reference to `BN_clear_free'
> >> ../../lib/libcoin.a(Script.o): In function `operator>>(CBigNum const&,
> unsigned int)':
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xf): undefined reference to `BN_init'
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x1e): undefined reference to `BN_copy'
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x47): undefined reference to `BN_clear_free'
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xcb): undefined reference to `BN_clear_free'
> >> ../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum const&,
> CBigNum const&)':
> >> Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const&, CBigNum
> const&)]+0x14): undefined reference to `BN_cmp'
> >> ../../lib/libcoin.a(Script.o): In function `operator>(CBigNum const&,
> CBigNum const&)':
> >> Script.cpp:(.text._ZgtRK7CBigNumS1_[operator>(CBigNum const&, CBigNum
> const&)]+0x14): undefined reference to `BN_cmp'
> >> ../../lib/libcoin.a(Script.o): In function `uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> > >)':
> >>
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0x6d): undefined reference to `SHA256'
> >>
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0xb8): undefined reference to `SHA256'
> >> collect2: ld returned 1 exit status
> >> make[2]: *** [bin/bitcoind] Error 1
> >> make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all]
> Error 2
> >> make: *** [all] Error 2
> >> -----
> >>
> >> What can I do?!
> >>
> >> Best,
> >> Thiago
> >>
> >>
> >> On 1 February 2012 12:18, Michael Grønager <gronager at ceptacle.com>
> wrote:
> >> Dear Bitcoiners,
> >>
> >> libcoin is now in a state ready for its first release, which I would
> like to share with you!
> >>
> >> === libcoin is a crypto currency library based on the bitcoin/bitcoin
> "Satoshi" client. ===
> >>
> >> Copenhagen, Denmark - 1st February 2012 Ceptacle announces the release
> of the first version of the crypto currency library "libcoin" based on the
> bitcoin/bitcoin "Satoshi" client.
> >>
> >> libcoin also maintains a version of bitcoind that is a 100% compatible
> drop-in replacement of the bitcoin/bitcoind client: You can use it on the
> same computer on the same files and you can call it with the same scripts.
> And you can easily extend it without touching the basic bitcoin source
> files.
> >>
> >> The libcoin/bitcoind client downloads the entire block chain 3.5 times
> faster than the bitcoin/bitcoind client. This is less than 90 minutes on a
> modern laptop!
> >>
> >> In libcoin, the Satoshi client code has been completely refactored,
> properly encapsulating classes, removing all globals, moving from threads
> and mutexes to a pure asynchronous approach. Functionalities have been
> divided into logical units and libraries, minimizing dependencies for e.g.
> thin clients.
> >>
> >> libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin,
> litecoin, ...) specific settings are maintained from a single class (Chain)
> and hence experiments with chain settings, mining, security and digital
> currencies for research and educational purposes are easily accessible. See
> the ponzicoin example for how you define your own chain.
> >>
> >> The build system of libcoin is based on CMake and supports builds of
> static and dynamic libraries on Linux, Mac OS X, and Windows.
> >>
> >> The libcoin license is LGPL v. 3. This mean that you can use it in open
> source as well as in commercial projects, but improvements should go back
> into the libcoin library.
> >>
> >> ======
> >>
> >> Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki
> >>
> >> Join libcoin on twitter: http://twitter.com/libcoin
> >>
> >> Download "libcoin Satoshi release":
> http://github.com/ceptacle/libcoin/zipball/v0.4.0.1
> >>
> >> Best regards,
> >>
> >> Michael Gronager, PhD
> >> Director, Ceptacle
> >> Jens Juels Gade 33
> >> 2100 Copenhagen E
> >> Mobile: +45 31 45 14 01
> >> E-mail: gronager at ceptacle.com
> >> Web: http://www.ceptacle.com/
> >>
> >>
> >>
> ------------------------------------------------------------------------------
> >> Keep Your Developer Skills Current with LearnDevNow!
> >> The most comprehensive online learning library for Microsoft developers
> >> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
> >> Metro Style Apps, more. Free future releases when you subscribe now!
> >> http://p.sf.net/sfu/learndevnow-d2d
> >> _______________________________________________
> >> Bitcoin-development mailing list
> >> Bitcoin-development at lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
> >>
> >
> > Michael Gronager, PhD
> > Director, Ceptacle
> > Jens Juels Gade 33
> > 2100 Copenhagen E
> > Mobile: +45 31 45 14 01
> > E-mail: gronager at ceptacle.com
> > Web: http://www.ceptacle.com/
> >
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20120224/19e15bb1/attachment.html>

2023-06-07 03:04:21 UTC

- reply

📅 Original date posted:2012-02-24
📝 Original message:Hi Michael!
I just run "bitcoind", from libcoin ("sudo make install") sources, with
empty ~/.bitcoin directory and:
Terminal 1: bitcoind # apparently okay
Terminal 2:
$ bitcoind getinfo # okay
{
"version" : 40001,
"blocks" : 57733,
"connections" : 8,
"difficulty" : 11.84622815,
"testnet" : false
}
# sleep a couple minutes
$ bitcoind getinfo # ok
{
"version" : 40001,
"blocks" : 67527,
"connections" : 8,
"difficulty" : 45.38582234,
"testnet" : false
}
But...
$ bitcoind help
HTTP error code: 404
JSON RPC Error code: -36001
Method not found.
$ bitcoind getaccountaddress ""
HTTP error code: 401
Error: couldn't parse reply from server
$ bitcoind listaccounts
HTTP error code: 401
Error: couldn't parse reply from server
Any tips?! lol
Thanks!
Thiago
2012/2/23 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
> AWESOME!!!
>
> I can compile libcoin at my Ubuntu 11.10... I just need to install:
>
> sudo aptitude install libboost1.46-all-dev
>
> ...alongside with another already installed dependencies, and now it
> works!!
>
> Thank you!
> Thiago
>
> 2012/2/23 Michael Grønager <gronager at ceptacle.com>
>
>> Hi Martinx,
>>
>> Another note:
>>
>> boost 1.42 and openssl 1.0 has a conflict (you will see it when you try
>> to compile coinHTTP with that specific combination: sslv2 has been removed
>> from openssl, but boost still references it.)
>>
>> You should do a :
>>
>> sudo apt-get upgrade libboost-dev-all
>>
>> to get the 1.46.1 library
>>
>> /M
>>
>>
>> On 23/02/2012, at 18:31, Martinx - ジェームズ wrote:
>>
>> > Hi Michael!
>> >
>> > Thank you for libcoin! It is a awesome evolution for Bitcoin and for
>> the CryptoCurrencies as a hole... Thanks!!!
>> >
>> > Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this
>> machine, I have compiled and running Bitcoin (from sources), Namecoin,
>> Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to
>> compile libcoin, I got:
>> >
>> > ----
>> > user at desk:~/libcoin$ ./configure
>> > -- The C compiler identification is GNU
>> > -- The CXX compiler identification is GNU
>> > -- Check for working C compiler: /usr/bin/gcc
>> > -- Check for working C compiler: /usr/bin/gcc -- works
>> > -- Detecting C compiler ABI info
>> > -- Detecting C compiler ABI info - done
>> > -- Check for working CXX compiler: /usr/bin/c++
>> > -- Check for working CXX compiler: /usr/bin/c++ -- works
>> > -- Detecting CXX compiler ABI info
>> > -- Detecting CXX compiler ABI info - done
>> > -- Looking for include files CMAKE_HAVE_PTHREAD_H
>> > -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
>> > -- Looking for pthread_create in pthreads
>> > -- Looking for pthread_create in pthreads - not found
>> > -- Looking for pthread_create in pthread
>> > -- Looking for pthread_create in pthread - found
>> > -- Found Threads: TRUE
>> > -- Looking for XOpenDisplay in
>> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
>> > -- Looking for XOpenDisplay in
>> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
>> > -- Looking for gethostbyname
>> > -- Looking for gethostbyname - found
>> > -- Looking for connect
>> > -- Looking for connect - found
>> > -- Looking for remove
>> > -- Looking for remove - found
>> > -- Looking for shmat
>> > -- Looking for shmat - found
>> > -- Looking for IceConnectionNumber in ICE
>> > -- Looking for IceConnectionNumber in ICE - found
>> > -- Found X11: /usr/lib/i386-linux-gnu/libX11.so
>> > -- Boost version: 1.42.0
>> > -- Found the following Boost libraries:
>> > -- date_time
>> > -- regex
>> > -- filesystem
>> > -- system
>> > -- program_options
>> > -- thread
>> > -- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so
>> > -- Looking for Q_WS_X11
>> > -- Looking for Q_WS_X11 - found
>> > -- Looking for Q_WS_WIN
>> > -- Looking for Q_WS_WIN - not found.
>> > -- Looking for Q_WS_QWS
>> > -- Looking for Q_WS_QWS - not found.
>> > -- Looking for Q_WS_MAC
>> > -- Looking for Q_WS_MAC - not found.
>> > -- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
>> > -- Found wxWidgets: TRUE
>> >
>> > The build system is configured to install libraries to /usr/local/lib
>> > Your applications may not be able to find your installed libraries
>> unless you:
>> > set your LD_LIBRARY_PATH (user specific) or
>> > update your ld.so configuration (system wide)
>> > You have an ld.so.conf.d directory on your system, so if you wish to
>> ensure that
>> > applications find the installed libcoin libraries, system wide, you
>> could install an
>> > libcoin specific ld.so configuration with:
>> > sudo make install_ld_conf
>> >
>> > -- Configuring done
>> > -- Generating done
>> > -- Build files have been written to: /home/user/libcoin
>> > ----
>> >
>> > Now I tried make, without success:
>> >
>> > ----
>> > .....
>> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xf):
>> undefined reference to `BN_init'
>> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x1e):
>> undefined reference to `BN_copy'
>> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x38):
>> undefined reference to `BN_set_negative'
>> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x4f):
>> undefined reference to `BN_clear_free'
>> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xd3):
>> undefined reference to `BN_clear_free'
>> > ../../lib/libcoin.a(Script.o): In function `operator<<(CBigNum const&,
>> unsigned int)':
>> > Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
>> int)]+0x16): undefined reference to `BN_init'
>> > Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
>> int)]+0x2c): undefined reference to `BN_lshift'
>> > Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
>> int)]+0xad): undefined reference to `BN_clear_free'
>> > ../../lib/libcoin.a(Script.o): In function `operator>>(CBigNum const&,
>> unsigned int)':
>> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
>> int)]+0xf): undefined reference to `BN_init'
>> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
>> int)]+0x1e): undefined reference to `BN_copy'
>> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
>> int)]+0x47): undefined reference to `BN_clear_free'
>> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
>> int)]+0xcb): undefined reference to `BN_clear_free'
>> > ../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum const&,
>> CBigNum const&)':
>> > Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const&, CBigNum
>> const&)]+0x14): undefined reference to `BN_cmp'
>> > ../../lib/libcoin.a(Script.o): In function `operator>(CBigNum const&,
>> CBigNum const&)':
>> > Script.cpp:(.text._ZgtRK7CBigNumS1_[operator>(CBigNum const&, CBigNum
>> const&)]+0x14): undefined reference to `BN_cmp'
>> > ../../lib/libcoin.a(Script.o): In function `uint256
>> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
>> char, std::allocator<unsigned char> > >
>> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
>> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
>> char*, std::vector<unsigned char, std::allocator<unsigned char> > >)':
>> >
>> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
>> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
>> char, std::allocator<unsigned char> > >
>> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
>> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
>> char*, std::vector<unsigned char, std::allocator<unsigned char> >
>> >)]+0x6d): undefined reference to `SHA256'
>> >
>> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
>> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
>> char, std::allocator<unsigned char> > >
>> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
>> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
>> char*, std::vector<unsigned char, std::allocator<unsigned char> >
>> >)]+0xb8): undefined reference to `SHA256'
>> > collect2: ld returned 1 exit status
>> > make[2]: *** [bin/bitcoind] Error 1
>> > make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all]
>> Error 2
>> > make: *** [all] Error 2
>> > -----
>> >
>> > What can I do?!
>> >
>> > Best,
>> > Thiago
>> >
>> >
>> > On 1 February 2012 12:18, Michael Grønager <gronager at ceptacle.com>
>> wrote:
>> > Dear Bitcoiners,
>> >
>> > libcoin is now in a state ready for its first release, which I would
>> like to share with you!
>> >
>> > === libcoin is a crypto currency library based on the bitcoin/bitcoin
>> "Satoshi" client. ===
>> >
>> > Copenhagen, Denmark - 1st February 2012 Ceptacle announces the release
>> of the first version of the crypto currency library "libcoin" based on the
>> bitcoin/bitcoin "Satoshi" client.
>> >
>> > libcoin also maintains a version of bitcoind that is a 100% compatible
>> drop-in replacement of the bitcoin/bitcoind client: You can use it on the
>> same computer on the same files and you can call it with the same scripts.
>> And you can easily extend it without touching the basic bitcoin source
>> files.
>> >
>> > The libcoin/bitcoind client downloads the entire block chain 3.5 times
>> faster than the bitcoin/bitcoind client. This is less than 90 minutes on a
>> modern laptop!
>> >
>> > In libcoin, the Satoshi client code has been completely refactored,
>> properly encapsulating classes, removing all globals, moving from threads
>> and mutexes to a pure asynchronous approach. Functionalities have been
>> divided into logical units and libraries, minimizing dependencies for e.g.
>> thin clients.
>> >
>> > libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin,
>> litecoin, ...) specific settings are maintained from a single class (Chain)
>> and hence experiments with chain settings, mining, security and digital
>> currencies for research and educational purposes are easily accessible. See
>> the ponzicoin example for how you define your own chain.
>> >
>> > The build system of libcoin is based on CMake and supports builds of
>> static and dynamic libraries on Linux, Mac OS X, and Windows.
>> >
>> > The libcoin license is LGPL v. 3. This mean that you can use it in open
>> source as well as in commercial projects, but improvements should go back
>> into the libcoin library.
>> >
>> > ======
>> >
>> > Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki
>> >
>> > Join libcoin on twitter: http://twitter.com/libcoin
>> >
>> > Download "libcoin Satoshi release":
>> http://github.com/ceptacle/libcoin/zipball/v0.4.0.1
>> >
>> > Best regards,
>> >
>> > Michael Gronager, PhD
>> > Director, Ceptacle
>> > Jens Juels Gade 33
>> > 2100 Copenhagen E
>> > Mobile: +45 31 45 14 01
>> > E-mail: gronager at ceptacle.com
>> > Web: http://www.ceptacle.com/
>> >
>> >
>> >
>> ------------------------------------------------------------------------------
>> > Keep Your Developer Skills Current with LearnDevNow!
>> > The most comprehensive online learning library for Microsoft developers
>> > is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
>> > Metro Style Apps, more. Free future releases when you subscribe now!
>> > http://p.sf.net/sfu/learndevnow-d2d
>> > _______________________________________________
>> > Bitcoin-development mailing list
>> > Bitcoin-development at lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/bitcoin-development
>> >
>>
>> Michael Gronager, PhD
>> Director, Ceptacle
>> Jens Juels Gade 33
>> 2100 Copenhagen E
>> Mobile: +45 31 45 14 01
>> E-mail: gronager at ceptacle.com
>> Web: http://www.ceptacle.com/
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20120224/cde27daa/attachment.html>

2023-06-07 03:04:17 UTC

- reply

📅 Original date posted:2012-02-23
📝 Original message:AWESOME!!!
I can compile libcoin at my Ubuntu 11.10... I just need to install:
sudo aptitude install libboost1.46-all-dev
...alongside with another already installed dependencies, and now it works!!
Thank you!
Thiago
2012/2/23 Michael Grønager <gronager at ceptacle.com>
> Hi Martinx,
>
> Another note:
>
> boost 1.42 and openssl 1.0 has a conflict (you will see it when you try to
> compile coinHTTP with that specific combination: sslv2 has been removed
> from openssl, but boost still references it.)
>
> You should do a :
>
> sudo apt-get upgrade libboost-dev-all
>
> to get the 1.46.1 library
>
> /M
>
>
> On 23/02/2012, at 18:31, Martinx - ジェームズ wrote:
>
> > Hi Michael!
> >
> > Thank you for libcoin! It is a awesome evolution for Bitcoin and for
> the CryptoCurrencies as a hole... Thanks!!!
> >
> > Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this
> machine, I have compiled and running Bitcoin (from sources), Namecoin,
> Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to
> compile libcoin, I got:
> >
> > ----
> > user at desk:~/libcoin$ ./configure
> > -- The C compiler identification is GNU
> > -- The CXX compiler identification is GNU
> > -- Check for working C compiler: /usr/bin/gcc
> > -- Check for working C compiler: /usr/bin/gcc -- works
> > -- Detecting C compiler ABI info
> > -- Detecting C compiler ABI info - done
> > -- Check for working CXX compiler: /usr/bin/c++
> > -- Check for working CXX compiler: /usr/bin/c++ -- works
> > -- Detecting CXX compiler ABI info
> > -- Detecting CXX compiler ABI info - done
> > -- Looking for include files CMAKE_HAVE_PTHREAD_H
> > -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
> > -- Looking for pthread_create in pthreads
> > -- Looking for pthread_create in pthreads - not found
> > -- Looking for pthread_create in pthread
> > -- Looking for pthread_create in pthread - found
> > -- Found Threads: TRUE
> > -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
> > -- Looking for XOpenDisplay in
> /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
> > -- Looking for gethostbyname
> > -- Looking for gethostbyname - found
> > -- Looking for connect
> > -- Looking for connect - found
> > -- Looking for remove
> > -- Looking for remove - found
> > -- Looking for shmat
> > -- Looking for shmat - found
> > -- Looking for IceConnectionNumber in ICE
> > -- Looking for IceConnectionNumber in ICE - found
> > -- Found X11: /usr/lib/i386-linux-gnu/libX11.so
> > -- Boost version: 1.42.0
> > -- Found the following Boost libraries:
> > -- date_time
> > -- regex
> > -- filesystem
> > -- system
> > -- program_options
> > -- thread
> > -- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so
> > -- Looking for Q_WS_X11
> > -- Looking for Q_WS_X11 - found
> > -- Looking for Q_WS_WIN
> > -- Looking for Q_WS_WIN - not found.
> > -- Looking for Q_WS_QWS
> > -- Looking for Q_WS_QWS - not found.
> > -- Looking for Q_WS_MAC
> > -- Looking for Q_WS_MAC - not found.
> > -- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
> > -- Found wxWidgets: TRUE
> >
> > The build system is configured to install libraries to /usr/local/lib
> > Your applications may not be able to find your installed libraries
> unless you:
> > set your LD_LIBRARY_PATH (user specific) or
> > update your ld.so configuration (system wide)
> > You have an ld.so.conf.d directory on your system, so if you wish to
> ensure that
> > applications find the installed libcoin libraries, system wide, you
> could install an
> > libcoin specific ld.so configuration with:
> > sudo make install_ld_conf
> >
> > -- Configuring done
> > -- Generating done
> > -- Build files have been written to: /home/user/libcoin
> > ----
> >
> > Now I tried make, without success:
> >
> > ----
> > .....
> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xf):
> undefined reference to `BN_init'
> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x1e):
> undefined reference to `BN_copy'
> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x38):
> undefined reference to `BN_set_negative'
> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x4f):
> undefined reference to `BN_clear_free'
> > Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xd3):
> undefined reference to `BN_clear_free'
> > ../../lib/libcoin.a(Script.o): In function `operator<<(CBigNum const&,
> unsigned int)':
> > Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x16): undefined reference to `BN_init'
> > Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0x2c): undefined reference to `BN_lshift'
> > Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
> int)]+0xad): undefined reference to `BN_clear_free'
> > ../../lib/libcoin.a(Script.o): In function `operator>>(CBigNum const&,
> unsigned int)':
> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xf): undefined reference to `BN_init'
> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x1e): undefined reference to `BN_copy'
> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0x47): undefined reference to `BN_clear_free'
> > Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
> int)]+0xcb): undefined reference to `BN_clear_free'
> > ../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum const&,
> CBigNum const&)':
> > Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const&, CBigNum
> const&)]+0x14): undefined reference to `BN_cmp'
> > ../../lib/libcoin.a(Script.o): In function `operator>(CBigNum const&,
> CBigNum const&)':
> > Script.cpp:(.text._ZgtRK7CBigNumS1_[operator>(CBigNum const&, CBigNum
> const&)]+0x14): undefined reference to `BN_cmp'
> > ../../lib/libcoin.a(Script.o): In function `uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> > >)':
> >
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0x6d): undefined reference to `SHA256'
> >
> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
> Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
> char, std::allocator<unsigned char> > >
> >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
> std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
> char*, std::vector<unsigned char, std::allocator<unsigned char> >
> >)]+0xb8): undefined reference to `SHA256'
> > collect2: ld returned 1 exit status
> > make[2]: *** [bin/bitcoind] Error 1
> > make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all]
> Error 2
> > make: *** [all] Error 2
> > -----
> >
> > What can I do?!
> >
> > Best,
> > Thiago
> >
> >
> > On 1 February 2012 12:18, Michael Grønager <gronager at ceptacle.com>
> wrote:
> > Dear Bitcoiners,
> >
> > libcoin is now in a state ready for its first release, which I would
> like to share with you!
> >
> > === libcoin is a crypto currency library based on the bitcoin/bitcoin
> "Satoshi" client. ===
> >
> > Copenhagen, Denmark - 1st February 2012 Ceptacle announces the release
> of the first version of the crypto currency library "libcoin" based on the
> bitcoin/bitcoin "Satoshi" client.
> >
> > libcoin also maintains a version of bitcoind that is a 100% compatible
> drop-in replacement of the bitcoin/bitcoind client: You can use it on the
> same computer on the same files and you can call it with the same scripts.
> And you can easily extend it without touching the basic bitcoin source
> files.
> >
> > The libcoin/bitcoind client downloads the entire block chain 3.5 times
> faster than the bitcoin/bitcoind client. This is less than 90 minutes on a
> modern laptop!
> >
> > In libcoin, the Satoshi client code has been completely refactored,
> properly encapsulating classes, removing all globals, moving from threads
> and mutexes to a pure asynchronous approach. Functionalities have been
> divided into logical units and libraries, minimizing dependencies for e.g.
> thin clients.
> >
> > libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin,
> litecoin, ...) specific settings are maintained from a single class (Chain)
> and hence experiments with chain settings, mining, security and digital
> currencies for research and educational purposes are easily accessible. See
> the ponzicoin example for how you define your own chain.
> >
> > The build system of libcoin is based on CMake and supports builds of
> static and dynamic libraries on Linux, Mac OS X, and Windows.
> >
> > The libcoin license is LGPL v. 3. This mean that you can use it in open
> source as well as in commercial projects, but improvements should go back
> into the libcoin library.
> >
> > ======
> >
> > Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki
> >
> > Join libcoin on twitter: http://twitter.com/libcoin
> >
> > Download "libcoin Satoshi release":
> http://github.com/ceptacle/libcoin/zipball/v0.4.0.1
> >
> > Best regards,
> >
> > Michael Gronager, PhD
> > Director, Ceptacle
> > Jens Juels Gade 33
> > 2100 Copenhagen E
> > Mobile: +45 31 45 14 01
> > E-mail: gronager at ceptacle.com
> > Web: http://www.ceptacle.com/
> >
> >
> >
> ------------------------------------------------------------------------------
> > Keep Your Developer Skills Current with LearnDevNow!
> > The most comprehensive online learning library for Microsoft developers
> > is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
> > Metro Style Apps, more. Free future releases when you subscribe now!
> > http://p.sf.net/sfu/learndevnow-d2d
> > _______________________________________________
> > Bitcoin-development mailing list
> > Bitcoin-development at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bitcoin-development
> >
>
> Michael Gronager, PhD
> Director, Ceptacle
> Jens Juels Gade 33
> 2100 Copenhagen E
> Mobile: +45 31 45 14 01
> E-mail: gronager at ceptacle.com
> Web: http://www.ceptacle.com/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20120223/ca0085c4/attachment.html>

2023-06-07 03:04:03 UTC

- reply

📅 Original date posted:2012-02-23
📝 Original message:Hi Michael!
Thank you for libcoin! It is a awesome evolution for Bitcoin and for the
CryptoCurrencies as a hole... Thanks!!!
Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this
machine, I have compiled and running Bitcoin (from sources), Namecoin,
Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to
compile libcoin, I got:
----
user at desk:~/libcoin$ ./configure
-- The C compiler identification is GNU
-- The CXX compiler identification is GNU
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Looking for include files CMAKE_HAVE_PTHREAD_H
-- Looking for include files CMAKE_HAVE_PTHREAD_H - found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Looking for XOpenDisplay in
/usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
-- Looking for XOpenDisplay in
/usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib/i386-linux-gnu/libX11.so
-- Boost version: 1.42.0
-- Found the following Boost libraries:
-- date_time
-- regex
-- filesystem
-- system
-- program_options
-- thread
-- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found.
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found.
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - not found.
-- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
-- Found wxWidgets: TRUE
The build system is configured to install libraries to /usr/local/lib
Your applications may not be able to find your installed libraries unless
you:
set your LD_LIBRARY_PATH (user specific) or
update your ld.so configuration (system wide)
You have an ld.so.conf.d directory on your system, so if you wish to ensure
that
applications find the installed libcoin libraries, system wide, you could
install an
libcoin specific ld.so configuration with:
sudo make install_ld_conf
-- Configuring done
-- Generating done
-- Build files have been written to: /home/user/libcoin
----
Now I tried make, without success:
----
.....
Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xf): undefined
reference to `BN_init'
Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x1e):
undefined reference to `BN_copy'
Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x38):
undefined reference to `BN_set_negative'
Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x4f):
undefined reference to `BN_clear_free'
Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xd3):
undefined reference to `BN_clear_free'
../../lib/libcoin.a(Script.o): In function `operator<<(CBigNum const&,
unsigned int)':
Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
int)]+0x16): undefined reference to `BN_init'
Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
int)]+0x2c): undefined reference to `BN_lshift'
Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned
int)]+0xad): undefined reference to `BN_clear_free'
../../lib/libcoin.a(Script.o): In function `operator>>(CBigNum const&,
unsigned int)':
Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
int)]+0xf): undefined reference to `BN_init'
Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
int)]+0x1e): undefined reference to `BN_copy'
Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
int)]+0x47): undefined reference to `BN_clear_free'
Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned
int)]+0xcb): undefined reference to `BN_clear_free'
../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum const&,
CBigNum const&)':
Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const&, CBigNum
const&)]+0x14): undefined reference to `BN_cmp'
../../lib/libcoin.a(Script.o): In function `operator>(CBigNum const&,
CBigNum const&)':
Script.cpp:(.text._ZgtRK7CBigNumS1_[operator>(CBigNum const&, CBigNum
const&)]+0x14): undefined reference to `BN_cmp'
../../lib/libcoin.a(Script.o): In function `uint256
Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
char, std::allocator<unsigned char> > >
>(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
char*, std::vector<unsigned char, std::allocator<unsigned char> > >)':
Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
char, std::allocator<unsigned char> > >
>(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
char*, std::vector<unsigned char, std::allocator<unsigned char> >
>)]+0x6d): undefined reference to `SHA256'
Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256
Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned
char, std::allocator<unsigned char> > >
>(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char,
std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned
char*, std::vector<unsigned char, std::allocator<unsigned char> >
>)]+0xb8): undefined reference to `SHA256'
collect2: ld returned 1 exit status
make[2]: *** [bin/bitcoind] Error 1
make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all] Error 2
make: *** [all] Error 2
-----
What can I do?!
Best,
Thiago
On 1 February 2012 12:18, Michael Grønager <gronager at ceptacle.com> wrote:
> Dear Bitcoiners,
>
> libcoin is now in a state ready for its first release, which I would like
> to share with you!
>
> === libcoin is a crypto currency library based on the bitcoin/bitcoin
> "Satoshi" client. ===
>
> Copenhagen, Denmark - 1st February 2012 Ceptacle announces the release of
> the first version of the crypto currency library "libcoin" based on the
> bitcoin/bitcoin "Satoshi" client.
>
> libcoin also maintains a version of bitcoind that is a 100% compatible
> drop-in replacement of the bitcoin/bitcoind client: You can use it on the
> same computer on the same files and you can call it with the same scripts.
> And you can easily extend it without touching the basic bitcoin source
> files.
>
> The libcoin/bitcoind client downloads the entire block chain 3.5 times
> faster than the bitcoin/bitcoind client. This is less than 90 minutes on a
> modern laptop!
>
> In libcoin, the Satoshi client code has been completely refactored,
> properly encapsulating classes, removing all globals, moving from threads
> and mutexes to a pure asynchronous approach. Functionalities have been
> divided into logical units and libraries, minimizing dependencies for e.g.
> thin clients.
>
> libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin,
> litecoin, ...) specific settings are maintained from a single class (Chain)
> and hence experiments with chain settings, mining, security and digital
> currencies for research and educational purposes are easily accessible. See
> the ponzicoin example for how you define your own chain.
>
> The build system of libcoin is based on CMake and supports builds of
> static and dynamic libraries on Linux, Mac OS X, and Windows.
>
> The libcoin license is LGPL v. 3. This mean that you can use it in open
> source as well as in commercial projects, but improvements should go back
> into the libcoin library.
>
> ======
>
> Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki
>
> Join libcoin on twitter: http://twitter.com/libcoin
>
> Download "libcoin Satoshi release":
> http://github.com/ceptacle/libcoin/zipball/v0.4.0.1
>
> Best regards,
>
> Michael Gronager, PhD
> Director, Ceptacle
> Jens Juels Gade 33
> 2100 Copenhagen E
> Mobile: +45 31 45 14 01
> E-mail: gronager at ceptacle.com
> Web: http://www.ceptacle.com/
>
>
>
> ------------------------------------------------------------------------------
> Keep Your Developer Skills Current with LearnDevNow!
> The most comprehensive online learning library for Microsoft developers
> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
> Metro Style Apps, more. Free future releases when you subscribe now!
> http://p.sf.net/sfu/learndevnow-d2d
> _______________________________________________
> Bitcoin-development mailing list
> Bitcoin-development at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20120223/676ab00f/attachment.html>

2023-06-07 02:24:49 UTC

- reply

📅 Original date posted:2011-09-22
🗒️ Summary of this message: User reports an error message when closing Bitcoin with network still online. Running Ubuntu 11.04 32 bits. Unknown exception and segmentation fault.
📝 Original message:BTW...
I'm running Ubuntu 11.04 32 bits...
When I just close the bitcoin with the network still online, I see almost
the same message:
---
martinx at floyd:~$ *./bitcoin-0.4.0rc2/bin/32/bitcoin*
************************
UNKNOWN EXCEPTION
bitcoin in CMyApp::OnUnhandledException()
Segmentation fault
martinx at floyd:~$ *lsb_release -ra*
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 11.04
Release: 11.04
Codename: natty
---
Thanks!
Thiago
2011/9/22 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
> Hi!
>
> When my network goes down and I close the Bitcoin, I see the following
> message:
>
> ---
> martinx at floyd:~$ ./bitcoin-0.4.0rc2/bin/32/bitcoin
> connect: Network is unreachable
>
>
> ************************
> UNKNOWN EXCEPTION
> bitcoin in CMyApp::OnUnhandledException()
>
> Segmentation fault
> martinx at floyd:~$
> ---
>
> Thanks,
> Thiago
>
> 2011/9/22 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
>
>> Hi John!
>>
>> Thank you for your answer...
>>
>> I have "two kinds" of address, the "static address", which I created
>> myself for any personal reason, and the "dinamic address", which is the
>> automatic generated address when I receive some Bitcoin amount, I label each
>> one (the automatic created by the software) with something like "DINAMIC-1",
>> "DINAMIC-2" and so on...
>>
>> I use my "dinamic address" in a "random" way, following the moon phase...
>> lol
>>
>> My point is: I like to keep track of all my Bitcoin Address, they are all
>> my...
>>
>> Please, leave this feature alive, as a option, disabled by default.
>>
>> I don't know why people fear about their own address... It is all under
>> "Receiving" tab! There is nothing to fear about it.
>>
>> ---
>>
>> BTW, I think this option should have some explanations at the "Options
>> screen", for example:
>>
>> For increasing your anonymity, enable the "Dinamic Bitcoin Address"
>> option and make sure to always use one new and different address for each
>> transaction. And do not link each address with your person!
>>
>> (X) Dynamic Bitcoin Address (a new Bitcoin Address will be created
>> automatically for you, after each new received Bitcoin amount)
>>
>> ---
>>
>> Thank you so much!
>>
>> Best,
>> Thiago
>>
>> 2011/9/22 John Smith <witchspace81 at gmail.com>
>>
>>>
>>>
>>> 2011/9/22 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
>>>
>>>> Hi everybody!!
>>>>
>>>> This is my first message here... I'm ThiagoCMC at bitcointalk...
>>>>
>>>> Well, one of the features that I like most is that, every time I
>>>> receive some Bitcoin amount, a new address appear at my
>>>> "AddressBook"automatically, AND, I like to track it.
>>>>
>>>
>>> Can I ask your rationale for this?
>>>
>>> From what I've noticed, most people's workflow is to create a new
>>> receiving address for each new contact that sends them bitcoins (either for
>>> every transaction, or they reuse the address for this person). To make sure
>>> that the address is labeled, they create it themselves and then give out the
>>> generated address.
>>>
>>> They are utterly spooked by suddenly appearing unlabeled addresses, of
>>> which they are unsure whether they are used, and which can never be removed.
>>>
>>> I'm fine with adding it back as an option but please leave it disabled by
>>> default...
>>>
>>> JS
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20110922/07ce02e5/attachment.html>

2023-06-07 02:24:46 UTC

- reply

📅 Original date posted:2011-09-22
🗒️ Summary of this message: The message describes an error when trying to connect to the Bitcoin network and an unknown exception causing a segmentation fault.
📝 Original message:Hi!
When my network goes down and I close the Bitcoin, I see the following
message:
---
martinx at floyd:~$ ./bitcoin-0.4.0rc2/bin/32/bitcoin
connect: Network is unreachable
************************
UNKNOWN EXCEPTION
bitcoin in CMyApp::OnUnhandledException()
Segmentation fault
martinx at floyd:~$
---
Thanks,
Thiago
2011/9/22 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
> Hi John!
>
> Thank you for your answer...
>
> I have "two kinds" of address, the "static address", which I created
> myself for any personal reason, and the "dinamic address", which is the
> automatic generated address when I receive some Bitcoin amount, I label each
> one (the automatic created by the software) with something like "DINAMIC-1",
> "DINAMIC-2" and so on...
>
> I use my "dinamic address" in a "random" way, following the moon phase...
> lol
>
> My point is: I like to keep track of all my Bitcoin Address, they are all
> my...
>
> Please, leave this feature alive, as a option, disabled by default.
>
> I don't know why people fear about their own address... It is all under
> "Receiving" tab! There is nothing to fear about it.
>
> ---
>
> BTW, I think this option should have some explanations at the "Options
> screen", for example:
>
> For increasing your anonymity, enable the "Dinamic Bitcoin Address" option
> and make sure to always use one new and different address for each
> transaction. And do not link each address with your person!
>
> (X) Dynamic Bitcoin Address (a new Bitcoin Address will be created
> automatically for you, after each new received Bitcoin amount)
>
> ---
>
> Thank you so much!
>
> Best,
> Thiago
>
> 2011/9/22 John Smith <witchspace81 at gmail.com>
>
>>
>>
>> 2011/9/22 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
>>
>>> Hi everybody!!
>>>
>>> This is my first message here... I'm ThiagoCMC at bitcointalk...
>>>
>>> Well, one of the features that I like most is that, every time I receive
>>> some Bitcoin amount, a new address appear at my "AddressBook"automatically,
>>> AND, I like to track it.
>>>
>>
>> Can I ask your rationale for this?
>>
>> From what I've noticed, most people's workflow is to create a new
>> receiving address for each new contact that sends them bitcoins (either for
>> every transaction, or they reuse the address for this person). To make sure
>> that the address is labeled, they create it themselves and then give out the
>> generated address.
>>
>> They are utterly spooked by suddenly appearing unlabeled addresses, of
>> which they are unsure whether they are used, and which can never be removed.
>>
>> I'm fine with adding it back as an option but please leave it disabled by
>> default...
>>
>> JS
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20110922/67f08fa4/attachment.html>

2023-06-07 02:24:42 UTC

- reply

📅 Original date posted:2011-09-22
🗒️ Summary of this message: ThiagoCMC requests that the option to track all Bitcoin addresses, including dynamic ones, be kept as an option, disabled by default. He believes there is nothing to fear about Bitcoin addresses and that the option should be explained in the options screen.
📝 Original message:Hi John!
Thank you for your answer...
I have "two kinds" of address, the "static address", which I created myself
for any personal reason, and the "dinamic address", which is the automatic
generated address when I receive some Bitcoin amount, I label each one (the
automatic created by the software) with something like "DINAMIC-1",
"DINAMIC-2" and so on...
I use my "dinamic address" in a "random" way, following the moon phase...
lol
My point is: I like to keep track of all my Bitcoin Address, they are all
my...
Please, leave this feature alive, as a option, disabled by default.
I don't know why people fear about their own address... It is all under
"Receiving" tab! There is nothing to fear about it.
---
BTW, I think this option should have some explanations at the "Options
screen", for example:
For increasing your anonymity, enable the "Dinamic Bitcoin Address" option
and make sure to always use one new and different address for each
transaction. And do not link each address with your person!
(X) Dynamic Bitcoin Address (a new Bitcoin Address will be created
automatically for you, after each new received Bitcoin amount)
---
Thank you so much!
Best,
Thiago
2011/9/22 John Smith <witchspace81 at gmail.com>
>
>
> 2011/9/22 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
>
>> Hi everybody!!
>>
>> This is my first message here... I'm ThiagoCMC at bitcointalk...
>>
>> Well, one of the features that I like most is that, every time I receive
>> some Bitcoin amount, a new address appear at my "AddressBook"automatically,
>> AND, I like to track it.
>>
>
> Can I ask your rationale for this?
>
> From what I've noticed, most people's workflow is to create a new receiving
> address for each new contact that sends them bitcoins (either for every
> transaction, or they reuse the address for this person). To make sure that
> the address is labeled, they create it themselves and then give out the
> generated address.
>
> They are utterly spooked by suddenly appearing unlabeled addresses, of
> which they are unsure whether they are used, and which can never be removed.
>
> I'm fine with adding it back as an option but please leave it disabled by
> default...
>
> JS
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20110922/c1429a26/attachment.html>

2023-06-07 02:24:36 UTC

- reply

📅 Original date posted:2011-09-22
🗒️ Summary of this message: ThiagoCMC likes the feature where a new address appears in his "AddressBook" every time he receives Bitcoin, and hopes it won't be deactivated.
📝 Original message:Hi everybody!!
This is my first message here... I'm ThiagoCMC at bitcointalk...
Well, one of the features that I like most is that, every time I receive
some Bitcoin amount, a new address appear at my "AddressBook"automatically,
AND, I like to track it.
This feature is broken at 0.3.24 but it is working again! Thanks BTW!!
But, I've read in some places that you guys are thinking in disable this
feature... Is that true?!
PLEASE, do NOT deactivate this feature! I mean, do not deactivate ANY
feature. Instead of, just add a option to turn it ON and OFF. Right?! ^^
Bitcoin is the most amazing project since Linux and Git!! :-P
Thank you guys!!
Best,
Thiago
On 9 September 2011 11:02, Gavin Andresen <gavinandresen at gmail.com> wrote:
> I just tagged the git tree: v0.4.00rc2
>
> Fixes from release candidate 1:
>
> + Optimize database writes for transactions with lots of inputs
> + Fix a deadlock that could occur when adding addresses from 'addr'
> messages and irc
> + Fix a potential problem with duplicate, un-spendable coinbase
> transactions if you were generating bitcoins, with a locked wallet,
> and ran out of keypool keys.
>
>
> --
> --
> Gavin Andresen
>
>
> ------------------------------------------------------------------------------
> Why Cloud-Based Security and Archiving Make Sense
> Osterman Research conducted this study that outlines how and why cloud
> computing security and archiving is rapidly being adopted across the IT
> space for its ease of implementation, lower cost, and increased
> reliability. Learn more. http://www.accelacomm.com/jaw/sfnl/114/51425301/
> _______________________________________________
> Bitcoin-development mailing list
> Bitcoin-development at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20110922/e9d8d5b6/attachment.html>