Koz Ross

Intersectional feminist. #3dprinting catboy. Haskells occasionally. Prusa critic. On the spectrum. He/him.

Public Key

npub1ln0zw5556x5466wgjnwm5sxanpqfr3faw7k9ml26vxefkxaq6r6spyerns

NIP-05 Address

Profile Code

nprofile1qqs0eh38222dr22ad8yffhd6grwessy3c57h0tzal4dxrv5mrwsdpagpz3mhxue69uhhyetvv9ujuerpd46hxtnfduqs6amnwvaz7tmwdaejumr0dsglv73v

Publishing to

relay.damus.io

nos.lol

Author Public Key

npub1ln0zw5556x5466wgjnwm5sxanpqfr3faw7k9ml26vxefkxaq6r6spyerns

Show more details

Last Notes

2026-04-23 01:07:52 CEST

My CNC's dust shoe broke several times, and now that it's more epoxy than dust shoe, I decided I'd make a new one. Because I can!
This was an interesting test of TPU for brush bristles. I ended up having to take scissors to them (they were too long), but I'm pretty happy how that turned out. Suction is decent too, which is nice.
#3DPrinting #FDM #CNCMachining
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/116/450/863/252/781/196/original/0f638d4522294fc1.webp

2026-04-22 19:57:21 CEST

Yay, they _finally_ fixed the front idlers on the Trident!
https://www.youtube.com/watch?v=fVlDLjvgPRg
#3DPrinting #FDM #DIY
@npub1d4n…dptf

2026-04-10 22:59:21 CEST

I've been working on some terrain tiles lately, to go with the Smoke and Steel terrain I made for #OnePageRules games. These got painted using spraycans and dip wash, and I'm _really_ happy with how they turned out. Two down, _twenty two_ to go...
#3DPrinting #FDM #MiniaturePainting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/116/382/414/265/407/615/original/789051d694320ebb.jpg

2026-04-08 22:13:35 CEST

It has been 0 days since I found an issue in a paid design for #3DPrinting . This one's FDM as well, which is even weirder. How do you even _make_ a mistake like that?
Note: Since MMF can't make a working site if their lives depended on it, I've added the screencaps I used to demonstrate the problem in a post further into the thread.
https://www.myminifactory.com/object/3d-print-battlegroundb-777032
@npub1d4n…dptf

2026-03-29 21:01:31 CEST

@npub18cx…wnff - you wanted terrain pics, you get terrain pics!
#FDM #3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/116/314/000/461/048/665/original/3eefcb437ccc4adc.jpg
https://assets.chaos.social/media_attachments/files/116/314/000/525/218/608/original/0de69aa010f4f43d.jpg
https://assets.chaos.social/media_attachments/files/116/314/000/528/824/271/original/7577a4a0c9441508.jpg
https://assets.chaos.social/media_attachments/files/116/314/000/554/822/127/original/5d2f1f5c25411532.jpg

2026-03-29 20:54:38 CEST

A demonstration of why you should always, _always_ ensure your PETG is dry. Can you spot the transition point?
#FDM #3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/116/313/976/229/807/214/original/73837277a858fdc8.jpg

2026-03-22 05:13:28 CET

Didn't know I needed a utility knife until yesterday. So I made one, using a Stanley 1992 blade, some eSUN PETG-CF, and some fasteners.
Original design: https://www.printables.com/model/1540891-utilty-knife-mk2 (I used some of the remixes, specifically the sheath and grips)
Oh, and [insert obligatory Crocodile Dundee reference].
@npub1d4n…dptf
#FDM #3DPrinting
https://assets.chaos.social/media_attachments/files/116/270/868/187/434/807/original/1bcfe560830b32a1.jpg
https://assets.chaos.social/media_attachments/files/116/270/868/189/312/106/original/a467addf472f8d39.jpg

2026-03-16 22:42:08 CET

Decided to use my supply of PETG-CF to make some miniature Skadisar. Worked pretty well, though not without issues: https://www.printables.com/make/3303077
@npub1d4n…dptf
#3DPrinting
#FDM

2026-03-06 21:24:46 CET

Dear filament manufacturers: if you're going to claim your filament is 'high-flow', either provide a racetrack or shut the fuck up. Stop lying to people. IME _every time_ I have seen a 'high flow' claim, it was basically a marketing lie attached to a price increase.
Brought to you by me getting nerdsniped into testing a PETG advertised as 'high-flow'... which couldn't even beat _PETG-CF_ at the same temperature.
#FDM #3DPrinting
@npub1d4n…dptf

2026-02-19 05:06:38 CET

It has been 0 days since I found a resin trap in a paid model.
FWIW, it _wasn't_ an OPR one this time!
@npub1d4n…dptf
#Resin3DPrinting

2026-02-17 06:10:57 CET

It has been 0 days since I found a resin trap in an OPR model.
I seriously don't understand what's up with their QC process. This is, no joke, the _fourth_ time I've had this problem. What is their bizarre fixation with having people print resin grenades?
@npub1d4n…dptf
#Resin3DPrinting

2026-02-02 08:06:25 CET

#3DPrinting Fedi: I am looking for a riser for the lid of my Creality K1 Max, as I'm getting a bit sick of all the reverse Bowden routing issues in the stock design. However, I need the following requirements to be met:
* No air vents in the riser, at least as an option.
* The ability to externally mount the filament sensor.
* Not too much plastic use (as far as reasonable).
Any good suggestions? I've seen a bunch of designs, but don't know which to pick.
@npub1d4n…dptf

2026-01-14 21:40:49 CET

It has been 0 days since OPR designs have failed to print for me. To be fair, this is more of a general problem with presupported miniatures than with OPR specifically, but it's still obnoxious.
#Resin3DPrinting #3DPrinting
@npub1d4n…dptf

2025-12-30 21:52:26 CET

Fun #FDM discovery yesterday. I was printing some clamps for my new CNC, and of course, I wanted the strongest material I could get my hands on. I have Polymax PC to hand, but I could also source some CF or GF nylon (also from Polymaker).
Now, one thing I learned about nylon (from this video here: https://www.youtube.com/watch?v=u8dIpwd6tzo) is that nylon is _so_ hygroscopic that finished prints absorb water and change their properties as they do so. This helped set the context for what I saw.
@npub1d4n…dptf
1/?

2025-12-28 06:27:56 CET

- reply

I _definitely_ need to figure out how to prevent that 'tearing', both on my jigsaw and on my CNC. I suspect this is operator error, but I don't know what I should be doing differently in both cases.

2025-12-28 06:27:12 CET

For my first #CNCMachining job, I decided to be on-brand. This was made using the SVG tracing functionality in UGS (so, not even proper CAM), and I ended up doing an inside-line, followed by an on-line, pass.
I plan to cut it down a bit on the edges, then display it somewhere. That way, I can see where I came from as I learn more.
@npub18cx…wnff - you wanted cool thing, you get (kinda) cool thing.
https://assets.chaos.social/media_attachments/files/115/795/528/922/698/391/original/3a9d11d54766acfa.jpg

2025-12-27 21:37:48 CET

So, I got a new CNC, which I am slowly learning to use. It's been fairly good so far, apart from the position of the estop button, which was less than great.
However, I have an #FDM printer, and #FreeCAD, so I fixed this problem. Figured I'd publish it for everyone to use and modify.
https://www.printables.com/model/1530863-lunyee-3018-cnc-endstop-relocation
#3DPrinting #CNCMachining
@npub1d4n…dptf

2025-12-26 10:55:13 CET

Just came across this video. Really clever combination of ideas! Never thought this could work with FDM.
https://www.youtube.com/watch?v=FNVBK7-h9Fs
#3DPrinting #FDM
@npub1d4n…dptf

2025-12-20 18:45:31 CET

- reply

Basically, a combination of what I've seen from people like My Tech Fun, as well as personal experience when sourcing something actually decent, tell me that any video saying 'CF does nothing zomg lol' is at best misguided, at worst completely wrong. YMMV of course.

2025-12-20 18:35:33 CET

- reply

Whenever I see such videos, I have to ask 'which filament from which manufacturer?'. Because if you look at tests done by people like Igor from My Tech Fun, CF fills can, and _do_, make a difference mechanically.
Even if the video has some kind of clever methodology, unless it's doing a broad suite of tests across many filaments and manufacturers, all their fancy equipment means nothing and it's just elaborate clickbait.

2025-12-11 05:50:29 CET

Lots of wood screws and clamps later. Now I have a place to keep my K1 Max print sheets conveniently nearby. As well as anything else I might need.
#3DPrinting #FDM
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/115/699/121/636/239/051/original/b4c14cd6b440fd71.jpg

2025-12-05 20:46:01 CET

Really cool thing I discovered recently: https://ochafik.com/openscad2/
This is basically OpenSCAD running in your browser. Really handy for doing small modifications, or working on a parametric part, without installing anything.
@npub1d4n…dptf

2025-11-23 00:08:12 CET

Really useful video for folks who are planning to build or upgrade an #FDM printer. tl;dw: sticking a heatsink on the bottom of the motor won't do much, you want one on the side.
https://www.youtube.com/watch?v=eerxaoaRhQI
@npub1d4n…dptf
#3DPrinting

2025-11-15 19:26:17 CET

Really great thing for #FDM printed bridging, and now with slicer support too! https://www.youtube.com/watch?v=Mrs2kAuRCBk
#3DPrinting
@npub1d4n…dptf

2025-11-14 08:15:21 CET

PONY!
If you know, you know.
#FDM #3DPrinting @npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/115/546/813/902/370/638/original/ae6101aba3cb2e50.jpg
https://assets.chaos.social/media_attachments/files/115/546/813/892/091/621/original/25cb8dc1a4042427.jpg
https://assets.chaos.social/media_attachments/files/115/546/813/893/500/929/original/10b2235fd4de1c37.jpg

2025-11-08 09:30:23 CET

I came across this design recently: https://www.printables.com/model/1435996-holy-grail-filament-dry-box-a-tribute
Given its specific goals to be cheap, easy to print, and keep out moisture, with data to show for it, I thought I'd give the single-spool version a go. I am very happy with it, and it actually costs me _less_ than your typical cereal container drybox too! Might just be NZ prices, but it's a great deal for me, and I'll make more of them.
The second colour was me running out of filament.
#3DPrinting #FDM
https://assets.chaos.social/media_attachments/files/115/513/132/426/550/208/original/02e314d7dae43158.jpg
https://assets.chaos.social/media_attachments/files/115/513/132/428/696/220/original/9acc4d94b37c91f2.jpg
https://assets.chaos.social/media_attachments/files/115/513/132/436/757/217/original/62093d042f6b8464.jpg

2025-11-07 18:59:37 CET

#FDM Fedi: I'm having some weird issues at the seams of my prints, most notably with PETG. This has started happening after I moved my K1 Max's filament sensor to the outside of the printer.
Note: this is _not_ general under-extrusion. It only happens at the seam, specifically at the start of a layer. I first thought it was a PA issue, but changing PA up or down doesn't seem to affect this problem. I don't under-extrude elsewhere.
Any ideas what this could be? @npub1d4n…dptf #3DPrinting
https://assets.chaos.social/media_attachments/files/115/509/707/271/526/593/original/43856b28e99f4366.jpg
https://assets.chaos.social/media_attachments/files/115/509/707/304/629/202/original/8a477cf694eac015.jpg
https://assets.chaos.social/media_attachments/files/115/509/707/345/612/820/original/142a3817732224da.jpg
https://assets.chaos.social/media_attachments/files/115/509/707/372/382/919/original/e6d4e84ca362faf3.jpg

2025-11-04 04:02:02 CET

So I (digitally) kitbashed some Techmarine(sses) for my Red Vanguards (fem socialist marines). These are for an upcoming Hammer of <del>Avernii</del>Socialism 1K.
#Miniatures #Resin3DPrinting #3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/115/489/193/447/571/830/original/b80399c419f15dd9.jpg
https://assets.chaos.social/media_attachments/files/115/489/193/433/371/091/original/8a3766ac9b07ab97.jpg

2025-10-12 04:57:05 CEST

I'm having the _weirdest_ issue with Orca Slicer. At random, when I load it up, it either fails to render tab contents (the 'outer interface' renders, but the tab is a grey slab), or after a while, the tab freezes and ignores all commands (doesn't rotate, right click doesn't bring up a menu, buttons do nothing, etc).
It happens no matter what I do: AppImage, Flatpak, even a build from source! It started recently, and seems to happen largely at random.
#Linux #3DPrinting #FDM
@npub1d4n…dptf

2025-09-23 22:55:31 CEST

To all people on Printables posting #FDM designs: please, for the love of $DEITY, include a STEP version! I often run into the situation where I want to make a slight modification: this is often trivial with STEP files, but _very_ non-trivial with STLs.
Furthermore, STL is a pretty awful format even for printing stuff. Basically all decent slicers can read STEP files now, there's no reason not to give us that option.
@npub1d4n…dptf
#3DPrinting

2025-09-20 04:50:58 CEST

#3DPrinting and #FDM Fedi: is there a generic (ideally Aliexpress) version of this cable here: https://store.micro-swiss.com/collections/creality-k1c/products/flowtech-adapter-cables-xhb-and-hy2-0-terminals . It would cost me NZD36 to get one of these from MicroSwiss, and frankly that's an absurd amount of money for a cable.
Context: I have a spare K1 Max hotend which I want to use in my #Endorphin build, but the connectors make it very hard to interface it with anything.
@npub1d4n…dptf

2025-09-13 23:31:19 CEST

Recently, I got my hands on a free Ender 5 Pro, whose Z axis was so bent it looked like a forklift drove over it. Because of that, I can finally do an #Endorphin build!
This thread will be an extended sojourn into this project, where I will aim to use random workshop junk whenever possible. I won't make this a hard rule, but I'll try and avoid buying new if I can.
First things first, gotta strip down the frame! So much useless junk there.
@npub1d4n…dptf #3DPrinting #FDM #DIY
1/n
https://assets.chaos.social/media_attachments/files/115/199/114/283/840/560/original/64e9d2e2e011e430.jpg

2025-09-12 22:44:45 CEST

Today is #DnD5e day for me after a while away. I printed an entire huge plate of Dungeon Blocks terrain, using a filament I got from a local vendor on the _dirt_ cheap. It was advertised as 'red', but you can judge for yourself what exact colour that ended up being.
#3DPrinting #FDM
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/115/193/270/943/238/567/original/b8c4b63d36bc984a.jpg

2025-09-07 20:35:06 CEST

Another banger from Igor: https://www.youtube.com/watch?v=U-aTEslkqco
tl;dw:
* Bambu PLA Tough+ is worse in every way (or at best, no better) than PLA Basic, except for impact resistance
* PLA Basic Silver has almost the same impact resistance as PLA Tough+, but costs considerably less
* Bambu's filament range is _nothing_ like colour matched
* Bambu's PLA Basic is nothing like consistent across its colours
All interesting results, and worth knowing.
@npub1d4n…dptf
#3DPrinting #FDM

2025-09-05 23:46:35 CEST

Another weekend, another tuning thread! This one comes from an interesting situation I found myself in: I needed a lot of ABS, and I needed it cheap. Normally I'd use a vendor generic (which isn't amazing but works), but I managed to find something even cheaper from said vendor, that being JAMG HE ABS.
This stuff is _hilariously_ cheap (NZD22.6, which is USD13.2 or so). Thus, let the fun begin!
1/n
#3DPrinting #FDM
@npub1d4n…dptf

2025-09-05 23:42:30 CEST

After the longest print for my K1 Max on record (something like 30 hours), here we have more terrain! It's still not everything I need, but I'll have to take a filament tuning break first, as I'm almost out.
One tile _did_ fail (due to very thin vertical sections which broke), but with ABS and its low layer adhesion, that's always a risk.
#FDM #3DPrinting #Terrain #DnD
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/115/153/794/113/187/976/original/29fcb61697df8dac.jpg
https://assets.chaos.social/media_attachments/files/115/153/794/128/559/899/original/a27901710c5d7818.jpg
https://assets.chaos.social/media_attachments/files/115/153/794/159/146/028/original/b33e29cdd45c049c.jpg

2025-08-28 04:50:27 CEST

The #Gridfinity will continue until morale improves.
This was my first proper project using ABS-GF, and I'm _really_ happy with it. Even if the grey attracts _every_ spec of dirt and grime in a ten-mile radius. Major, _major_ props to the (author of) the Gridfinity addon for #FreeCAD. The dice tray, as well as the bin for d6s, were both generated in it.
#FDM
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/115/104/097/763/090/641/original/c712bfbee96a2273.jpg
https://assets.chaos.social/media_attachments/files/115/104/097/789/216/707/original/981b516a14cfe808.jpg
https://assets.chaos.social/media_attachments/files/115/104/097/789/169/569/original/7be971c6be6a054f.jpg
https://assets.chaos.social/media_attachments/files/115/104/097/799/024/465/original/244db5b7a352348f.jpg

2025-08-23 01:35:56 CEST

I recently posted some really cool minis made by a friend. Now, there are some expansion and kitbashing bits to go with them! The hat-like helmets are my favourite.
https://cults3d.com/en/3d-model/game/voidmen-iv-legion-expansion
#3DPrinting #Resin3DPrinting #Miniatures
@npub1d4n…dptf

2025-08-20 22:12:36 CEST

- reply

FWIW, the K1 series Flow Tech hotend is literally the same design as stock: ceramic heater, same length. The differences are:
* Cables are all at the back, unlike stock, where one is at the front for some reason; and
* There is a metal tube around the rear of the ceramic core.
This is why this trick with Unicorns can work.

2025-08-20 22:09:40 CEST

- reply

AFAIK, 'Flow Tech' is just a brand. The hotends are different for each printer they support. Thus, while all Flow Tech hotends fit Flow Tech nozzles, only the K1 series hotend can fit Unicorns. This has to do with their shape and size, as they are meant to be drop-in replacements.

2025-08-20 20:39:57 CEST

- reply

This applies only to the Flow Tech hotends designed for the K1 series. I don't think the SV08 ones are the same.
You could in theory build a Xenomorph: https://www.printables.com/model/1002270-xenomorph-toolhead-for-sovol-sv08 . This supports a lot of different hotends, so you could pick one you like.

2025-08-20 03:41:32 CEST

#FDM folks who own a K1 series printer: I've made a discovery (well, _confirmed_ a discovery) regarding the MicroSwiss Flow Tech hotend. If you don't install the copper throat adapter, you can (and should) use Unicorn nozzles (and clones) instead of MicroSwiss's proprietary overpriced ones. They fit just fine, and work just fine.
@npub1d4n…dptf
#3DPrinting

2025-08-16 20:12:01 CEST

Another really good video from CNC Kitchen: https://www.youtube.com/watch?v=u8dIpwd6tzo
Notably, while being about nylon, it actually shows that PLA can creep quite significantly too. This is why whenever _anyone_ tells you to make functional parts that will be under constant loads out of PLA, you should not listen to them, as they basically don't know what they're talking about.
This is (partially) a subtoot.
@npub1d4n…dptf
#3DPrinting #FDM

2025-08-10 20:34:10 CEST

Another week, another really interesting video from Igor. This one was a five-way test of PET-CF, including some new tests.
tl;dw:
* PET-CFs are definitely not all made the same. Polymaker's one in particular seems quite different to the others.
* You want to enclose PET-CF when printing, it definitely helps.
* PET-CF parts can beat aluminium in compression resistance in some cases.
* 300C is OK to print PET-CF.
https://www.youtube.com/watch?v=6qOrv_r-rKU
#FDM #3DPrinting
@npub1d4n…dptf

2025-08-09 11:45:37 CEST

#FDM Fedi, I need some assistance. I've just started using a 1mm nozzle (no, not a typo), and I'm getting this weird corner-rounding-type effect when printing, but _only_ from layer 2 onwards. First layers go down fine without problem.
I first thought this was a pressure advance issue, but changing that setting didn't have any effect. Even disabling pressure advance completely didn't do anything!
Does anyone have any idea what this might be and how to fix it?
#3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/998/159/863/779/699/original/8cddea9a82da1442.jpg
https://assets.chaos.social/media_attachments/files/114/998/159/863/901/621/original/c3d1eb48c83459fe.jpg

2025-08-07 20:56:48 CEST

Another fun discovery about my K1 Max: apparently, Creality have a firmware hack that shuts down the print camera when the chamber reads 60C. This is _not_ the camera overheating: it happens when the reading hits 60, no matter what state the camera's in.
The fix is to bodge the resistance numbers of the 'expected' chamber temperature thermistor, then make another entry that displays the 'real' temperature. I'll post it in a reply to this.
#JustCrealityThings
@npub1d4n…dptf #3DPrinting #FDM

2025-08-02 04:13:43 CEST

With the K1 Max now being fully upgraded and working (I hope!), time to share some of the designs I used to finish the job.
One of them is this ... plug I guess for the rear fan exhaust hole. It's a huge leaker of chamber heat, and this mod allows you to stop the leaking. It doesn't require removing the fan, or even any fasteners: just print and snap in place.
https://www.printables.com/model/1372528-k1-max-rear-fan-hole-blocker
#FreeCAD #FDM #3DDesign #CAD
@npub1d4n…dptf

2025-07-21 09:35:02 CEST

New #FDM printer, time for a new tuning thread! Since my K1 Max now has hardened gears in its extruder (after a fun aside involving a snapped shoulder bolt), we can now run abrasives all day.
Figured I'd start by trying something I've never worked with - ABS-GF. I never used something like this before, having had no source of it previously. However, I now have _two_ local vendors (meaning 'within driving distance') selling this stuff, so we're going to run it.
1/?
@npub1d4n…dptf #3DPrinting

2025-07-19 20:17:52 CEST

K1 and K1 Max operators: super important thing I discovered yesterday. The K1 and K1 Max both use graphite bushings on their X motion (not LM bearings like you would expect), and thus, your rods require oiling with something like a 3-in-1 or a sewing machine oil regularly. Yes, I am kicking myself that I now have _another_ such printer.
The difference this makes is large. Here are my X input shaper charts. You can probably guess which one is pre-grease.
#3DPrinting #FDM @npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/881/258/777/908/797/original/fbf8059e1ff7542d.png
https://assets.chaos.social/media_attachments/files/114/881/258/793/131/957/original/696e69904b7329b8.png

2025-07-18 09:20:03 CEST

So, the XPlus-3 finally died in a way I couldn't recover it from. We're talking the most spectacular case of heatcreep I have ever seen. Like, 'throat clogged with plastic, smoke out of hotend' kind of deal. I replaced its hotend with my _one_ remaining good one... which then heatcrept twice. In a row. _With ABS_. In the first three layers.
So I got a K1 Max. First actual prints off it that weren't tests or mods. These are all ABS of various kinds. Enjoy.
#3DPrinting #FDM @npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/873/008/922/064/359/original/353a17d4fd85a20f.jpg
https://assets.chaos.social/media_attachments/files/114/873/008/932/767/258/original/3908a49b486bee7c.jpg
https://assets.chaos.social/media_attachments/files/114/873/008/938/195/553/original/632e64c4508feed1.jpg
https://assets.chaos.social/media_attachments/files/114/873/008/936/371/551/original/8f1cd255ad6a565e.jpg

2025-07-04 09:03:22 CEST

I recently found myself in a triple situation:
1. I needed a replacement hotend, but the only one I had was a Dragonfly BMO.
2. My toolhead doesn't support the Dragonfly BMO, only the Dragon.
3. I had just learned about STEP defeaturing in #FreeCAD
So, I did the only sensible thing: defeatured the mounting holes from the original hotend, and remade new ones. 15 minutes' work, and the result fits like a glove. The print quality is suffering from wet PETG here.
#FDM #3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/793/675/047/009/536/original/61b0bb8a7fcab1cc.jpg
https://assets.chaos.social/media_attachments/files/114/793/675/047/724/097/original/be5cd57c28f6d051.jpg

2025-07-01 07:32:32 CEST

On a bit of a PWA roll lately, so today, I decided to convert eddietheengineer's motor performance Excel sheet to an app.
https://simotor.retro-freedom.nz
Please try it out and let me know what you think! I plan to expand its functionality in the future, but this is the barest minimum of useful functionality I could make.
Currently, this takes some application specifics and motor specs, and outputs the expected torque.
@npub1d4n…dptf
#3DPrinting #App #DIY

2025-06-29 21:02:27 CEST

Matt the 3D Printing Nerd has done it again! This time, the printer is bigger, faster, and also weirdly more practical, than The 100, while still using a printed frame.
https://www.youtube.com/watch?v=qVF_iwO3d04
#3DPrinting #FDM
@npub1d4n…dptf

2025-05-30 05:35:42 CEST

_Love_ having to scrap a $20 part because of a presupport issue. Not pictured: the warping and cracking due to the improper support placement. Puppetswar normally does good work, so this is especially disappointing.
https://www.myminifactory.com/object/3d-print-husky-grav-tank-apc-433251
#Resin3DPrinting
#3DPrinting
@npub1d4n…dptf

2025-05-28 20:54:51 CEST

So, Polymaker came out with a new product, which claims to be a heat-resistant PLA, with impressive marketing numbers, but no TDS. Of course, Igor has us covered: https://www.youtube.com/watch?v=w01XqM7D8b0
Noteworthy moments for me:
* The heat resistance claimed by Polymaker is overblown, but HT-PLA still resists well over 100C.
* Annealing also helps creep, but weakens both tensile strength and layer adhesion. HT-PLA creeps a lot still.
Otherwise seems like regular PLA.
#3DPrinting #FDM @npub1d4n…dptf

2025-05-26 19:31:40 CEST

"I can't sleep when they send out shit like this."
https://youtu.be/KRNXNJslhxg?si=T5aZ9-bsB0kogKAa&t=1573
NoizieWorks has spoken to an ex-Prusa dev, and the insights are a mixture of insightful and horrifying. Some highlights, in no particular order:
* Prusa are an enormous company: when said dev left, there were 700 people working there, and it's probably more now.
* The Core One got what the dev called 'the AliExpress special' over his objections, which is why it VFAs so badly.
@npub1d4n…dptf
#3DPrinting #FDM
1/?

2025-05-17 04:07:15 CEST

It has _also_ been 0 days since a creator on MMF misunderstood what 'supportless' and 'FDM' mean when used together.
https://www.myminifactory.com/object/3d-print-brutalist-2-story-ruins-wtc-terrain-428761
Let's see whether my feedback goes anywhere. Last time I tried it, it worked well - I got to meet @npub16gy…kerf !
#FDM #3DPrinting @npub1d4n…dptf

2025-05-17 00:12:48 CEST

It has been 0 days since I have seen a bad hollowing job in a paid model. This time? Tiny pinholes instead of proper drainage holes, which of course got blocked and failed to drain anything.
#Resin3DPrinting #3DPrinting @npub1d4n…dptf

2025-05-08 05:08:07 CEST

Now my box of game aids is finished! The tokens required _both_ #FreeCAD and #Blender to make, but I'm happy with how they turned out.
#3DPrinting #FDM #Gridfinity #B3D #Blender3D
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/469/991/187/745/265/original/20611a2ed371df1a.jpg
https://assets.chaos.social/media_attachments/files/114/469/991/189/333/091/original/5d7753ca0b0c311b.jpg
https://assets.chaos.social/media_attachments/files/114/469/991/204/957/740/original/a90c1fee2a81a50a.jpg

2025-05-06 09:23:19 CEST

Realized I needed a (Gridfinity) box for my play aids that match my new army. This is what I came up with. Drilling and tapping 9 holes was absolutely worth it.
Now to add the hinges and latch, and then fill it with Gridfinity!
#3DPrinting #FDM
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/459/680/385/902/742/original/b3e1f804848332fb.jpg

2025-04-18 23:48:29 CEST

Been a bit quiet lately, but that's because I decided (at the last minute) to enter a league at the LGS. Naturally, I decided I wanted to do it with kitbashed women marines, with a lot of meme socialism. Thus, here is one fruit of my labours - more to come!
Part list used in next post.
@npub1d4n…dptf
#Warhammer40K #3DPrinting #Resin3DPrinting
https://assets.chaos.social/media_attachments/files/114/361/150/797/382/000/original/198fa9d066352d0f.jpg
https://assets.chaos.social/media_attachments/files/114/361/150/802/831/286/original/05d6600c995c0c57.jpg
https://assets.chaos.social/media_attachments/files/114/361/150/803/386/300/original/8090820e8ebb150a.jpg
https://assets.chaos.social/media_attachments/files/114/361/150/808/881/760/original/f4060754725960cb.jpg

2025-04-05 08:09:44 CEST

So I had to interrupt my resin tuning thread because I, uhh, ran out of the resin I was tuning. Luckily I had some spare, in clear, and finally settled on a 3.4s exposure.
So, to celebrate, printing this absolutely huge fox. This thing's print height is almost 220mm, and the estimate is _under five hours_. I of course hollowed it, but even then, this is 150g of resin.
#Resin3DPrinting #3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/283/861/750/471/648/original/4b1c6226664b04ba.png

2025-04-04 06:32:22 CEST

I am the very model of financial responsibility.
No seriously, my Mono 2 was starting to die, and I outgrew it a while ago.
#3DPrinting #Resin3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/277/818/392/272/204/original/e007ac12a1da8f3d.jpg

2025-04-01 04:58:58 CEST

- reply

What is the 'capacitor plague'?

2025-04-01 00:14:20 CEST

Qidi 'engineering' strikes again: https://www.reddit.com/r/3Dprinting/comments/1jnuju1/rqiditech3d_permanently_banned_me_for_warning/
tl;dr - a Qidi Plus4's SSR (which we have been warning about since day freaking 1) finally blew and caught fire, with serious consequences.
I've said it before and I'll say it again: do not buy Qidi printers, don't suggest others buy Qidi printers. This isn't just sloppy engineering, this is outright dangerous.
#3DPrinting #FDM
@npub1d4n…dptf

2025-03-31 22:41:05 CEST

Kitbashes printed! I'm glad the supports held, but I will have to re-do these, due to a minor but significant failure, and also some of the support orientations were _not_ optimal.
#3DPrinting #Resin3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/258/969/664/556/878/original/f4d9a2b15d5788e3.jpg
https://assets.chaos.social/media_attachments/files/114/258/969/665/736/285/original/1bd89c7aeea0d0ab.jpg
https://assets.chaos.social/media_attachments/files/114/258/969/665/726/420/original/9ae19d4b86b69b73.jpg
https://assets.chaos.social/media_attachments/files/114/258/969/665/834/560/original/94cc961b50e497a6.jpg

2025-03-29 07:42:00 CET

Decided to print one of these today. Definitely came out great: combination of the extrusional consistency of ABS and variable layer height really did work here. I scaled up to 150% of the original size, as I found the original too small.
Model: https://www.printables.com/model/1153844-flexi-crocodile
Filament: https://www.3dea.co.nz/shop/product/abs-bronze-1-75mm/
#3DPrinting #FDM
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/244/352/049/817/687/original/6465e9eec333b4ea.jpg
https://assets.chaos.social/media_attachments/files/114/244/352/057/177/118/original/7445760f927009bd.jpg

2025-03-28 19:37:21 CET

Biggest ABS print on record for me. Took just shy of four hours, and is basically the full Z height of my printer.
Not a flawless print, due to a noticeable tear in the perimeters (which you can just about see), unfortunately, but no warping or delamination.
#3DPrinting #FDM
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/241/502/634/172/514/original/d68d75ff90da101c.jpg

2025-03-24 02:14:50 CET

The duality of #FDM . Both of these were today.
#3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/114/214/752/314/407/669/original/d7e65a9a6eb64520.jpg
https://assets.chaos.social/media_attachments/files/114/214/752/333/290/655/original/bbaad6e1f874c7b4.jpg

2025-03-22 07:59:30 CET

Today's fun #3DPrinting discoveries:
1. Polymaker's PolyMax PC is a lot stronger than I expected.
2. What exactly happens when you start a resin print, but forget to remove your vat cover.
You can probably guess how these two insights are related.
#3DPrinting
@npub1d4n…dptf

2025-03-21 20:34:49 CET

So, not only are Qidi bad at hardware, they're bad at software too: https://github.com/QIDITECH/QIDI_PLUS4/issues/49
Do not buy Qidi printers. Do not encourage others to buy Qidi printers. This is absolutely unacceptable on a printer that costs USD800. The fact that _busywaiting_ can kill the MCU is just beyond absurd.
#3DPrinting #FDM
@npub1d4n…dptf

2025-03-14 22:50:09 CET

TIL that I'm out of black ABS. Since Catboat-1 is due upgrades (and a rewiring), I need black ABS.
"No problem, you love Paramount3D, get some of that!"
Paramount3D do not ship free to me anymore. I _love_ how NZ supply chains are a fucking constantly-moving target...
#3DPrinting #FDM
@npub1d4n…dptf

2025-03-14 19:20:43 CET

This video, plus its comments, are a perfect demonstration of the Creality Effect (that is, 'issues nobody else has') and why I do not advise buying any printer that they make: https://www.youtube.com/watch?v=udhl2mzfLbc
Even if you ignore the comments, the fact that heatcreep is this much of a problem on such an expensive machine, in _PETG_ of all things, is rather sad, and typical of Creality.
#3DPrinting #FDM
@npub1d4n…dptf

2025-02-21 19:42:29 CET

Again, interesting work by My Tech Fun: https://www.youtube.com/watch?v=5XOqUfmWhig
I've done some PLA-CF annealing experiments before, and this mirrors what I discovered. However, these experiments printed using regular settings, rather than the typically-suggested 100% infill, and seemingly still had minimal deformation.
I'll summarize the findings, and what I think really needs to be done by someone to complete the analysis of PLA-CF annealing. (1/?)
#3DPrinting #FDM @npub1d4n…dptf

2025-02-19 07:59:22 CET

Today's modelling - Commander Hindsight, or as I've taken to calling him, Commander Leg Day. This is a model by Piper Makes, but I've upscaled it significantly, and also swapped out its somewhat spindly chicken legs.
@npub12aa…4x73 - you might find this interesting.
@npub1d4n…dptf
#Miniatures #Warhammer40K #3DPrinting #Resin3DPrinting
https://assets.chaos.social/media_attachments/files/114/029/247/642/664/469/original/5400e08ad3cad7c4.jpg
https://assets.chaos.social/media_attachments/files/114/029/247/667/636/209/original/bb64a1bfc0d7e829.jpg
https://assets.chaos.social/media_attachments/files/114/029/247/666/234/246/original/5244acb1c7f9d2e1.jpg
https://assets.chaos.social/media_attachments/files/114/029/247/672/368/698/original/944cd46d9df115ab.jpg

2025-02-15 07:17:21 CET

Dammit, I'm making those six inches (of build plate) count! It's not the size, it's how you use it!
@npub1d4n…dptf
#3DPrinting #Resin3DPrinting
https://assets.chaos.social/media_attachments/files/114/006/431/494/219/767/original/bb07c3b5cc152073.png
https://assets.chaos.social/media_attachments/files/114/006/431/843/693/814/original/8ce6680bdcba4ee1.jpg

2025-02-10 22:23:28 CET

#Resin3DPrinting folks: I'm getting some odd behaviours from my printer (and possibly my wash-and-cure), both of which most clearly manifest on large, flat surfaces. The first is this weird bubbly texture: the print in the image is fully cured and dry to the touch, but the texture persists. The second are these weird small surface lines, parallel to the build plate.
Any help figuring these out would be awesome.
#3DPrinting @npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/981/689/556/784/179/original/a54d843a3101093c.jpg
https://assets.chaos.social/media_attachments/files/113/981/689/571/856/262/original/982afda0b50bfb3d.jpg

2025-02-10 01:57:56 CET

Having spent a day prototyping (with sub-millimetre adjustments), I now have this replacement #3DDesign for the back toolhead cover of the XPlus-3. I'm going to resin print it, because trying to work within the constraints I'm dealing with while _also_ considering FDM printability felt like an even bigger chore.
The magnets glue into the small holes, and then the larger ones receive M2.5 caps. Yes I had to special-order magnetic M2s to go in the original screw holes.
#3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/976/874/580/978/013/original/0ca207958d085ad9.png
https://assets.chaos.social/media_attachments/files/113/976/874/585/449/671/original/d4c18cc9b22420bc.png
https://assets.chaos.social/media_attachments/files/113/976/874/586/179/551/original/580bfa1e2b067c38.png

2025-02-08 02:57:54 CET

Another LGS request, even larger this time! 5x5x14 units, with a dividable internal box.
The dividers from the original design were too thin and ended up quite bendy, so I improvised.
#3DPrinting #FDM
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/965/777/485/184/268/original/5664dcdfb997fa3c.jpg
https://assets.chaos.social/media_attachments/files/113/965/777/541/530/165/original/00cc3d581dd67962.jpg
https://assets.chaos.social/media_attachments/files/113/965/777/556/503/208/original/a2ee7c395b1cb783.jpg

2025-02-07 18:04:42 CET

Once again, Igor from My Tech Fun doing the work: https://www.youtube.com/watch?v=YuLNVoUtaes
tl;dw:
* Bigger objects benefit from this method more than small ones
* Because of the 'shift' induced by the Ten Tech script, you need to bump your EM on the 'shifted' sections or your part gets _weaker_ due to reduced perimeter contact
* Given the above, at least some of the strength increase is attributable to the extra material
#3DPrinting #FDM
@npub1d4n…dptf
1/?

2025-02-06 01:52:49 CET

So, fun #3DPrinting discovery of the day: if you babystep the Z axis on the XPlus-3, it will persist until reboot. This in itself wouldn't be a problem: the issue is that, when you start a new print, the babystepping is reset to 0, although the Z offset stays as if the babystepping was still on.
I did _not_ save this value. This is 100% whatever torment the Qidi 'engineering' team subjected Klipper to 'working'.
Garbage.
@npub1d4n…dptf

2025-01-31 08:14:39 CET

A thing I made with #FDM over the past week. This is a Gridfinity case, 6 cells by 4 cells, for someone at my LGS, in exchange for a painting commission.
Cultural learnings to make benefit glorious nation of #3DPrinting :
* Epoxy glue stinks. A lot.
* Extruding, then chamfering, SVGs is such a hard problem, I had to resort to no fewer than _three_ tools, and they still didn't do what I wanted.
Next post will contain model and materials used.
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/921/716/057/620/703/original/de71f7d374d37257.jpg
https://assets.chaos.social/media_attachments/files/113/921/716/073/177/650/original/9050d8c36c713306.jpg

2025-01-26 20:05:29 CET

Another day, another model badly-designed for #Resin3DPrinting : https://www.myminifactory.com/object/3d-print-space-elf-warmancer-bundle-volume-1-pinups-285250
I'm kind of annoyed actually. This designer does quite good work, and this is the first issue of this kind I've yet had with anything they make. It's also _really_ obvious, and would have been spotted if they did a test print. In fact, one of the _other_ community prints showed this to be an issue ... a year ago.
Glad @npub16gy…kerf triple-checks _all_ her work!
#3DPrinting @npub1d4n…dptf

2025-01-25 08:44:58 CET

So... I printed the OPR model that gave me so much grief (with some UVTools help). Now begins the #Painting effort.
I tried a slightly different black preshade here. Instead of equal parts Aquadrop and water, I used a ratio of 5:3:2 of Aquadrop, water and flow aid. In retrospect, should have used more flow aid.
Work time is a real challenge for this model due to its size - the hair ended up getting too dry to work.
@npub18cx…wnff - another model to your scale.
#MiniaturePainting #FediPaint #Art
https://assets.chaos.social/media_attachments/files/113/887/873/218/410/336/original/10736d6fc7e880cf.jpg

2025-01-24 20:18:45 CET

So, to my surprise, OPR responded to my complaints, as made here: https://chaos.social/@koz/113865066733839226
Having checked the model just now, the resin traps are gone from the head (although I still feel one of the horn 'tunnels' is questionable), and the base has been oriented to be 6 inch printer friendly (although I would have gone for a less steep angle for less supports). Glad this got done fairly quickly!
#Resin3DPrinting #3DPrinting @npub1d4n…dptf

2025-01-21 06:39:57 CET

I swear to everloving Jeebus, OPR _cannot_ help themselves with the resin traps. This is the _third_ time I have found resin traps in their models, which I might add are being sold for money, with a reputation for prints that 'just work'.
Sigh.
#Resin3DPrinting #3DPrinting @npub1d4n…dptf

2025-01-15 19:47:18 CET

New year, new tuning thread! Today's filament which caught my curiosity is 3DEA's PETG-CF Pro15. This stuff is interesting because, unlike most CF filaments, its carbon fibres are concentrated in its core, leaving an outer jacket of pure material. As if to flex this fact, it is available both in black and in white: I am printing the white today.
This is similar to the techniques used by Essentium for their HTN-CF25, but the CF load is higher.
Let's go!
#FDM #3DPrinting @npub1d4n…dptf

2025-01-12 20:56:05 CET

As a fan of #Gridfinity, I found this #OpenSCAD tool both really useful and really convenient. I've made a lot of different bins with it, and can confirm it works well.
https://www.printables.com/model/274917-gridfinity-rebuilt-in-openscad
@npub1d4n…dptf
#DIY #FDM #3DPrinting

2025-01-10 06:01:53 CET

- reply

You can also order both flavours of Dragon from TL's website together with those nozzles!

2025-01-10 06:01:27 CET

- reply

V6 is probably a safe choice. I would recommend a Dragon as your hotend (SF is recommended if you want to print PLA at all, HF if not), and those take V6s while having a rigid mount and a one-handed tighten. I hardly run a thing else.

2025-01-10 03:58:03 CET

Because patents are the worst, ZS Plus nozzles are about to vanish. Aliexpress _already_ doesn't have any, and TL's own site has them at half price to clear: https://trianglelab.net/products/zstc-mk8-volcano-v6-zsd-mk8-volcano-v6-zs-mk8-volcano-v6-k1-nozzle
Words cannot express how much I love these nozzles. It's the first high-flow hardened that isn't designed terribly from first principles, and mine has run _spools_ of CF material with hardly a complaint. Get one (or several) while you can.
#FDM #3DPrinting
@npub1d4n…dptf

2025-01-09 02:42:35 CET

- reply

I can also suggest the cute dancing fox, which apart from being cute, also serves as a pretty good 'calibration/are things working' model: https://www.printables.com/model/553732-cute-dancing-fox-low-polysupportless

2025-01-07 20:06:36 CET

For #Resin3DPrinting folks: do _not_ buy 'Sunlu 14K ABS-like' resin. While regular Sunlu ABS-like is great, this stuff is _absolute garbage_. It's extremely brittle (I've had prints snap when removing supports), gets weird air bubbles in it (see pictures) and in general is fussy, hard to tune in, and will give you nothing but anguish.
#3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/788/632/673/105/908/original/26118aa92a7bb460.jpg
https://assets.chaos.social/media_attachments/files/113/788/632/698/119/022/original/8984db58fc5ceff6.jpg

2025-01-05 07:34:17 CET

Now my drawer of Gridfinity is done! The plate there is printed out of PET-CF (not _PETG_-CF, _PET_-CF), which is the stiffest material I have, and has heatset inserts in it, which receive 12mm BSHC M3s that go through the magnet holes of the Gridfinity, that just so happen to be the right size.
I added lots of extra holes in case I needed them, but it turned out only 10 was enough. Oh, and that I need more 12mm BSHCs.
#Gridfinity #FDM #DIY
https://assets.chaos.social/media_attachments/files/113/774/337/705/864/657/original/e69ef4d700115a72.jpg
https://assets.chaos.social/media_attachments/files/113/774/337/783/019/710/original/65a7a73152831cef.jpg
https://assets.chaos.social/media_attachments/files/113/774/337/799/974/210/original/9b440d21f0e0a3fe.jpg
https://assets.chaos.social/media_attachments/files/113/774/337/838/932/850/original/cc2dd4eb7b9acb3f.jpg

2025-01-03 23:29:13 CET

Back from my holiday, back to the workshop. Pictured: a 96-cell Gridfinity, using bolt-together plates. Also pictured: material creep, which I plan to deal with using reinforcer plates from below.
#FDM #Gridfinity #3DPrinting #DIY
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/766/777/381/719/516/original/d403ee4e3c031393.jpg
https://assets.chaos.social/media_attachments/files/113/766/777/382/702/194/original/0459d1bd3f4d220c.jpg
https://assets.chaos.social/media_attachments/files/113/766/777/390/731/638/original/e2453a63b0edd458.jpg

2024-12-20 19:05:45 CET

As ever, My Tech Fun does the best experiments: https://www.youtube.com/watch?v=aLfz6pbaqXY
tl;dw:
* Microwaves can dry filament
* Spools however tend to trap it in hard-to-access places, making this method highly dependent on how your filament is spooled
* Do not put -CF filaments in the microwave unless you enjoy starting fires
#3DPrinting
#FDM
@npub1d4n…dptf

2024-12-19 00:09:20 CET

Fantastic news for people who do #Resin3DPrinting . UVTools have just released version 5: https://github.com/sn4k3/UVtools/releases/tag/v5.0.0
Among other things, we now have support for Anycubic Mono 4 (and 4 Ultra), as well as the M7 series. This comes with PrusaSlicer helpers too, so everyone can be in on the fun!
#3DPrinting
@npub1d4n…dptf

2024-12-18 01:45:38 CET

Thanks to a bit of #FDM printing, this Skadis is now populated. Looks like a stock photo.
Onto the next one!
If anyone is interested in any of the designs pictured here, let me know and I'll link them.
#3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/671/050/930/990/515/original/9e7a69f932affbbc.jpg

2024-12-17 23:55:56 CET

Engineers and engineering experts: what is the point of Voronoi patterns? I see them used in a whole tonne of 3D printed designs, but I have no idea why. Do they just look pretty, or is there some kind of mechanical advantage relative material use there?
#3DPrinting
@npub1d4n…dptf

2024-12-16 23:38:21 CET

It's a real workshop now! For extra fun, my screws-going-into-wall-anchors were too small, so I had to print some special washers.
Design (OpenSCAD parametric): https://www.printables.com/model/66181-customizable-washer
#3DPrinting
@npub1d4n…dptf
https://assets.chaos.social/media_attachments/files/113/664/893/818/853/725/original/eac6580b078fe820.jpg
https://assets.chaos.social/media_attachments/files/113/664/893/819/196/239/original/785674b9e7453663.jpg
https://assets.chaos.social/media_attachments/files/113/664/893/833/334/304/original/5707e729d32e37c2.jpg