<unnamed>

Public Key

npub1t9vk487xpf4nh0cd4pesvw0wsa5yj3pskq2llle9vg0smvrexyts90lya2

Profile Code

nprofile1qqs9jkt2nlrq56emhux6sucx88hgw6zfgsctq90llujky8cdkpunz9cpzemhxue69uhhyetvv9ujuurjd9kkzmpwdejhguaa0yx

Publishing to

relay.primal.net

Last Notes

2023-06-07 20:24:13 CEST

- reply

📅 Original date posted:2020-05-04
📝 Original message:>
> A side effect of this proposal is it would seem to make it not possible to
> produce a signature for a transaction without having access to the inputs.
> This is limiting for a number of cases where you don't care about that
> data. There are a litany of use cases where you don't want to have
> SIGHASH_ALL behavior, and having to sign the scriptpubkeys breaks that. So
> at the very least it should respect other flags.
>
I agree, sha_scriptPubKeys should be included only if hash_type does not
match SIGHASH_ANYONECANPAY. I am also sympathetic to aj's idea of making
the scriptPubKey field dependent on hash_type matching SIGHASH_ANYONECANPAY.
I also don't really understand the exact attack. So you submit a
> transaction to the wallet asking them to sign input 10. They sign. They've
> committed to the signature being bound to the specific COutpoint and input
> index, so I don't see how they wouldn't be required to sign a second
> signature with the other output too? Is there an attack you can describe
> end-to-end relying on this behavior?
>
For example, in a CoinJoin transaction the attacker can construct a
transaction with two inputs (in1, in2) of identical value and two outputs
of identical value, one belonging to the user (user_out) and another
belonging to the attacker (attacker_out). If such a transaction is sent to
the hardware wallet twice with in1 marked as external the first time and
in2 marked as external the second time, then the hardware wallet will
display two signing requests to the user with spending amounts of in2 -
user_out and in1 - user_out respectively. The user will think that they are
signing two different CoinJoin transactions, while in reality they are
signing two different inputs to a single transaction and sending half of
the amount to the attacker.
As an alternative proposal, I think you can just make a separate BIP for
> some new sigash flags that can be reviewed separately from taproot. There's
> a lot of value in investing in figuring out more granular controls over
> what the signature hash is you sign, which may have some exciting
> contracting implications!
>
The proposal of adding sha_scriptPubKeys is just an optimization which is
not intended to change what the signature message is committing to. Thus I
don't see it as warranting a new sigash flag.
Alternatively, there's the scheme described in the email you linked by Greg
> Saunders (with the scheme co-attributed to Andrew Poelstra), which seems
> reasonable to me.[1] It's only downside (AFAICT) is that it requires an
> extra one-way communication from a signing device to a coordinator. For a
> true offline signer, that can be annoying, but for an automated hardware
> wallet participating in coinjoins or LN, that doesn't seem too burdensome
> to me.
>
Yes, I see this as the correct direction forward. Whatever the exact format
of the ownership proof will be, the proof will need to be signed by the
owner of the UTXO using BIP-0322 or something along those lines. So the
scriptPubKey is needed to verify that signature.
Cheers,
Andrew Kozlik
On Sat, May 2, 2020 at 11:16 PM Russell O'Connor <roconnor at blockstream.com>
wrote:
> On Sat, May 2, 2020 at 10:26 AM Anthony Towns <aj at erisian.com.au> wrote:
>
>>
>> except that we'd arguably still be missing:
>>
>> is this a coinbase output? (Coin.fCoinBase)
>> what was the height of the coin? (Coin.nHeight)
>>
>> Maybe committing to the coinbase flag would have some use, but committing
>> to the height would make it hard to chain unconfirmed spends, so at
>> least that part doesn't seem worth adding.
>>
>
> To add to this point, the height of the coin is something that is *not*
> currently covered by any signature mode and including it would constitute a
> change of an entirely different caliber; a change that I would strongly
> caution against for your above reason and more.
>
> The coinbase output flag is currently covered by the signature as the
> outpoint hash has the required information (its prevout index of 0xFFFFFFFF
> is only legal in a coinbase transaction). While I'm not particularly
> enthusiastic about making it easier to distinguish coinbase outputs from
> other outputs, and I worry a little about alternative designs for
> implementing the Bitcoin protocol where this information is not so readily
> available, I suppose I won't really oppose adding it. However, I don't
> think anyone is seriously proposing it.
>
> -
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20200504/7722585e/attachment.html>

2023-06-07 20:24:11 CEST

- reply

📅 Original date posted:2020-05-01
📝 Original message:Hi Jeremy,
What you are saying is correct and I am not disputing that there is
sufficient cryptographic commitment in the signature message. As I tried to
explain, my proposal is about avoiding the need for the metadata protocol
you speak of. Avoiding such a protocol has been a design goal in both
BIP-143 [1, 2] and BIP-341 [3, 4], because having to acquire each of the
transactions being spent in their entirety places a significant burden on
offline signing devices.
Cheers,
Andrew
[1]
https://github.com/bitcoin/bips/blob/master/bip-0143.mediawiki#motivation
[2] https://bitcointalk.org/index.php?topic=181734.0
[3]
https://github.com/bitcoin/bips/blob/master/bip-0341.mediawiki#cite_note-16
[4]
https://github.com/bitcoin/bips/blob/master/bip-0341.mediawiki#cite_note-17
On Fri, May 1, 2020 at 8:56 AM Jeremy <jlrubin at mit.edu> wrote:
> Hi Andrew,
>
> If you use SIGHASH_ALL it shall sign the COutPoints of all inputs which
> commit to the scriptPubKeys of the txn.
>
> Thus the 341 hash doesn't need to sign any additional data.
>
> As a metadata protocol you can provide all input transactions to check the
> scriptPubKeys.
>
> Best,
>
> Jeremy
> --
> @JeremyRubin <https://twitter.com/JeremyRubin>
>
>
> On Thu, Apr 30, 2020 at 1:22 AM Andrew Kozlik via bitcoin-dev <
> bitcoin-dev at lists.linuxfoundation.org> wrote:
>
>> Hi everyone,
>>
>> In the current draft of BIP-0341 [1] the signature message commits to the
>> scriptPubKey of the output being spent by the input. I propose that the
>> signature message should commit to the scriptPubKeys of *all* transaction
>> inputs.
>>
>> In certain applications like CoinJoin, a wallet has to deal with
>> transactions containing external inputs. To calculate the actual amount
>> that the user is spending, the wallet needs to reliably determine for each
>> input whether it belongs to the wallet or not. Without such a mechanism an
>> adversary can fool the wallet into displaying incorrect information about
>> the amount being spent, which can result in theft of user funds [2].
>>
>> In order to ascertain non-ownership of an input which is claimed to be
>> external, the wallet needs the scriptPubKey of the previous output spent by
>> this input. It must acquire the full transaction being spent and verify its
>> hash against that which is given in the outpoint. This is an obstacle in
>> the implementation of lightweight air-gapped wallets and hardware wallets
>> in general. If the signature message would commit to the scriptPubKeys of
>> all transaction inputs, then the wallet would only need to acquire the
>> scriptPubKey of the output being spent without having to acquire and verify
>> the hash of the entire previous transaction. If an attacker would provide
>> an incorrect scriptPubKey, then that would cause the wallet to generate an
>> invalid signature message.
>>
>> Note that committing only to the scriptPubKey of the output being spent
>> is insufficient for this application, because the scriptPubKeys which are
>> needed to ascertain non-ownership of external inputs are precisely the ones
>> that would not be included in any of the signature messages produced by the
>> wallet.
>>
>> The obvious way to implement this is to add another hash to the signature
>> message:
>> sha_scriptPubKeys (32): the SHA256 of the serialization of all
>> scriptPubKeys of the previous outputs spent by this transaction.
>>
>> Cheers,
>> Andrew Kozlik
>>
>> [1]
>> https://github.com/bitcoin/bips/blob/master/bip-0341.mediawiki#common-signature-message
>> [2]
>> https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2017-August/014843.html
>> _______________________________________________
>> bitcoin-dev mailing list
>> bitcoin-dev at lists.linuxfoundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20200501/a04d22c8/attachment-0001.html>