<unnamed>

Public Key

npub1txgfckk6qxy5yh6c7sag0m4sjycag8fn9xx7jj5efpf05s7ztt7s5grmss

Profile Code

nprofile1qqs9nyyuttdqrz2ztav0gw58a6cfzvw5r5ejnr0ff2v5s5h6g0p94lgprpmhxue69uhhyetvv9ujuumwdae8gtnnda3kjctvpt9afg

Publishing to

relay.snort.social

Last Notes

2023-08-05 21:58:15 UTC

- reply

📅 Original date posted:2023-08-04
🗒️ Summary of this message: Adding a field to silent payment addresses to encode expiration dates in terms of days after an epoch can fix the risk of non-expiring addresses in Bitcoin. Custom compact encoding can be used for different levels of granularity.
📝 Original message:
I agree. Non-expiring addresses are a significant risk to bitcoin users.
On 2023-08-04 (Fri) at 17:39:03 +0000, Peter Todd via bitcoin-dev wrote:
> Fixing this is easy: add a 3 byte field to silent payments addresses, encoding
> the expiration date in terms of days after some epoch. 2^24 days is 45,000
> years, more than enough. Indeed, 2 bytes is probably fine too: 2^16 days is 180
> years. We'll be lucky if Bitcoin still exists in 180 years.
Instead of a fixed width nDays, consider a custom compact encoding with
the position of the first 0-bit indicating the number of extension bytes
and the encoded granularity.
bytes | prefix | usable bits | granularity | max expiration
------|------------|-------------|-------------|---------------
1 | 0b0 | 7 | year | 128 years
2 | 0b10 | 14 | week | 315 years
3 | 0b110 | 21 | day | 5700 years
4 | 0b1110 | 28 | block | 5100 years
5 | 0b11110 | 35 | ??? | ???
6 | 0b111110 | 42 | ??? | ???
7 | 0b1111110 | 49 | ??? | ???
8 | 0b11111110 | 56 | ??? | ???
For address expiration, year or week expiration will typically be
sufficiently granular, but for rare occasions more granularity can be
encoded with longer addresses. This method also degrades cleanly even if
the same address format is still in use in 100 or 300 years.
I included block-based expiration to enable SP users to match CLTVs
embedded in their scripts, e.g.
<2 years> OP_CLTV <recovery_path> OP_VAULT_RECOVER
or
<2 years> OP_CLTV <backup_key> OP_CHECKSIG
Best,
--Brandon

2023-06-07 23:20:08 UTC

- reply

📅 Original date posted:2023-03-13
🗒️ Summary of this message: Brandon suggests replacing the internal key with a hardcoded NUMS point to enable batching of multiple vault inputs with the same scriptpubkey.
📝 Original message:Hi Gents,
> > I don't think replacing the internal-public-key makes sense -- if it
> was immediately spendable via the keypath before there's no reason for
> it not to be immediately spendable now.
>
> Slavishly following the current proposal was the idea to make sure all
> functionality was captured; I agree with this change.
I think we do need to replace the internal key with a hardcoded NUMS
point to allow us to batch multiple vault inputs which might have
different internal keys but the same OP_FLU/OP_VAULT_TRIGGER script to
the same time+template-restricted output.
I like that in James' current PR proposal we can explicitly batch via
the implied input/output summation rules while avoiding address reuse.
If we can retain some or all of that, I think it would be good for on
chain efficiency and potentially privacy.
My thoughts on batching:
Many inputs with different internal keys can be combined to satisfy the
total output value for a single output, as long as their scriptpubkeys
with FLU and NUMS internal key are equal This enables avoiding address
reuse within the vault.
Many inputs with the same scriptpubkey can be combined to satisfy a
single CTV output template. This allows a user to unfsck themselves if
they initiate a withdrawal that cannot be satisfied because they didn't
send enough sats to satisfy their template.
Best,
--Brandon

2023-06-07 23:13:03 UTC

- reply

📅 Original date posted:2022-08-24
📝 Original message:On 2022-08-24 (Wed) at 11:18:43 +0200, Craig Raw via bitcoin-dev wrote:
> I would like to propose a BIP that specifies a format for the export and
> import of labels from a wallet. While transferring access to funds across
> wallet applications has been made simple through standards such as BIP39,
> wallet labels remain siloed and difficult to extract despite their value,
> particularly in a privacy context.
I like the idea of standardizing the transfer of this valuable
information.
> The proposed format is a simple two column CSV file, with the reference to
> a transaction, address, input or output in the first column, and the label
> in the second column. CSV was chosen for its wide accessibility, especially
> to users without specific technical expertise. Similarly, the CSV file may
> be compressed using the ZIP format, and optionally encrypted using AES.
It seems like the format would be more useful if it also included
descriptors so that a single file could be used to transfer a wallet. I
think such an addition would improve usability for advanced users who
might have many such CSVs to manage, and would then be able to more
easily select between them. Descriptor,Label pairs could also be useful
in the format for the transfer of a wallet with several sub accounts.
Thanks,
--Brandon

2023-06-07 23:09:30 UTC

- reply

📅 Original date posted:2022-05-10
📝 Original message:Hi Rusty,
Thanks for this. Seems like a productive direction to explore.
To me, one of the biggest limitations of CTV is that the script is
specific to the amount of the input being spent. OP_TX makes it
possible, although clumsy, to emulate OP_IN_OUT_AMOUNT, which could be
combined with CTV emulation less OPTX_SELECT_OUTPUT_AMOUNT32x2 to allow
a single script to be reused. Given that potential, I wonder if
OPTX_SELECT_IN_OUT_AMOUNT32x2 would be worth adding to the initial set
of flags.
With that addition, a small script can be constructed for a relocatable,
batchable construction (eg. as a building block for vaults):
OPTX_SEPARATELY|OPTX_UNHASHED|OPTX_INPUTNUM OP_TX OP_DUP
OPTX_SELECT_VERSION|
OPTX_SELECT_LOCKTIME|
OPTX_SELECT_INPUT_SINGLE|
OPTX_SELECT_INPUT_SCRIPT|
OPTX_SELECT_INPUT_NSEQUENCE|
OPTX_SELECT_OUTPUT_SINGLE|
OPTX_SELECT_OUTPUT_SCRIPTPUBKEY|
OPTX_SELECT_IN_OUT_AMOUNT32x2 OP_TX <expectedhash> OP_EQUAL
* Additional inputs and change outputs can be added
* Could commit to 0 fee and still be useful
* Arbitrary amounts can be sent to the same script
* There is no txid predictability (unlike CTV)
* Anyone could rearrange such input/output pairs after broadcast
* Not suitable for some uses
* Potentially helpful for others
Best,
--Brandon
On 2022-05-10 (Tue) at 20:05:54 +0930, Rusty Russell via bitcoin-dev wrote:
> Hi all,
>
> TL;DR: a v1 tapscript opcode for generic covenants, but
> OP_SUCCESS unless it's used a-la OP_CHECKTEMPLATEVERIFY. This gives an
> obvious use case, with clean future expansion. OP_NOP4 can be
> repurposed in future as a shortcut, if experience shows that to be a
> useful optimization.
>
> (This proposal builds on Russell O'Connor's TXHASH[1], with Anthony
> Towns' modification via extending the opcode[2]; I also notice on
> re-reading that James Lu had a similar restriction idea[3]).
>
> Details
> -------
>
> OP_TX, when inside v1 tapscript, is followed by 4 bytes of flags.
> Unknown flag patterns are OP_SUCCESS, though for thoroughness some future
> potential uses are documented here. Note that pushing more than 1000
> elements on the stack or an element more than 512 bytes will hit the
> BIP-342 resource limits and fail.
>
> Defined bits
> ------------
>
> (Only those marked with * have to be defined for this soft fork; the
> others can have semantics later).
>
> OPTX_SEPARATELY: treat fields separately (vs concatenating)
> OPTX_UNHASHED: push on the stack without hashing (vs SHA256 before push)
>
> - The first nicely sidesteps the lack of OP_CAT, and the latter allows
> OP_TXHASH semantics (and avoid stack element limits).
>
> OPTX_SELECT_VERSION*: version
> OPTX_SELECT_LOCKTIME*: nLocktime
> OPTX_SELECT_INPUTNUM*: current input number
> OPTX_SELECT_INPUTCOUNT*: number of inputs
> OPTX_SELECT_OUTPUTCOUNT*: number of outputs
>
> OPTX_INPUT_SINGLE: if set, pop input number off stack to apply to
> OPTX_SELECT_INPUT_*, otherwise iterate through all.
> OPTX_SELECT_INPUT_TXID: txid
> OPTX_SELECT_INPUT_OUTNUM: txout index
> OPTX_SELECT_INPUT_NSEQUENCE*: sequence number
> OPTX_SELECT_INPUT_AMOUNT32x2: sats in, as a high-low u31 pair
> OPTX_SELECT_INPUT_SCRIPT*: input scriptsig
> OPTX_SELECT_INPUT_TAPBRANCH: ?
> OPTX_SELECT_INPUT_TAPLEAF: ?
>
> OPTX_OUTPUT_SINGLE: if set, pop input number off stack to apply to
> OPTX_SELECT_OUTPUT_*, otherwise iterate through all.
> OPTX_SELECT_OUTPUT_AMOUNT32x2*: sats out, as a high-low u31 pair
> OPTX_SELECT_OUTPUT_SCRIPTPUBKEY*: output scriptpubkey
>
> OPTX_SELECT_19...OPTX_SELECT_31: future expansion.
>
> OP_CHECKTEMPLATEVERIFY is approximated by the following flags:
> OPTX_SELECT_VERSION
> OPTX_SELECT_LOCKTIME
> OPTX_SELECT_INPUTCOUNT
> OPTX_SELECT_INPUT_SCRIPT
> OPTX_SELECT_INPUT_NSEQUENCE
> OPTX_SELECT_OUTPUTCOUNT
> OPTX_SELECT_OUTPUT_AMOUNT32x2
> OPTX_SELECT_OUTPUT_SCRIPTPUBKEY
> OPTX_SELECT_INPUTNUM
>
> All other flag combinations result in OP_SUCCESS.
>
> Discussion
> ----------
>
> By enumerating exactly what can be committed to, it's absolutely clear
> what is and isn't committed (and what you need to think about!).
>
> The bits which separate concatenation and hashing provide a simple
> mechanism for template-style (i.e. CTV-style) commitments, or for
> programatic treatment of individual elements (e.g. amounts, though the
> two s31 style is awkward: a 64-bit push flag could be added in future).
>
> The lack of double-hashing of scriptsigs and other fields means we
> cannot simply re-use hashing done for SIGHASH_ALL.
>
> The OP_SUCCESS semantic is only valid in tapscript v1, so this does not
> allow covenants for v0 segwit or pre-segwit inputs. If covenants prove
> useful, dedicated opcodes can be provided for those cases (a-la
> OP_CHECKTEMPLATEVERIFY).
>
> Cheers,
> Rusty.
>
> [1] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2022-January/019813.html
> [2] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2022-January/019819.html
> [3] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2022-January/019816.html
> _______________________________________________
> bitcoin-dev mailing list
> bitcoin-dev at lists.linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
--
--Brandon